Looking for a good high quality neck turning tool and case trimmer for My 50 bmg. A round about price and where you bought it would be helpful also.
Thanks
Thanks
Good 50 bmg neck turner and case trimmer?
- Thread starter buckskin52
- Start date
Re: Good 50 bmg neck turner and case trimmer?
sinclair sells a neck turner, their neck turning handles suck though. Neck turning 50 cal cases is a nightmare.
wilson sells a 50 cal trimmer , i bought it , it sucks. I wouldn't buy it , though i dont think their are to many good alternatives.
http://www.precisionreloading.com/mm5/me...de=50_CAL_PRODS
good luck , prepare for misery.
sinclair sells a neck turner, their neck turning handles suck though. Neck turning 50 cal cases is a nightmare.
wilson sells a 50 cal trimmer , i bought it , it sucks. I wouldn't buy it , though i dont think their are to many good alternatives.
http://www.precisionreloading.com/mm5/me...de=50_CAL_PRODS
good luck , prepare for misery.
Re: Good 50 bmg neck turner and case trimmer?
K&M makes a great trimmer, it trims to length and does your case mouth bevels at the same time. Make sure to buy the case holder for the drill at the same time.
Place the trimmer into a vise and go to town with a cordless drill.
Terry
K&M makes a great trimmer, it trims to length and does your case mouth bevels at the same time. Make sure to buy the case holder for the drill at the same time.
Place the trimmer into a vise and go to town with a cordless drill.
Terry
Re: Good 50 bmg neck turner and case trimmer?
I use CH4D trimmer, around $300 and a K&M neck turner, $120. I remove the case holder handle and chuck up in drill motor for necks.
I use CH4D trimmer, around $300 and a K&M neck turner, $120. I remove the case holder handle and chuck up in drill motor for necks.
Re: Good 50 bmg neck turner and case trimmer?
Wilson trimmers suck? I beg to differ. I've probably trimmed a few thousand .50 BMG with one and have absolutely no complaints. Only fifty trimmer I am aware of that really cuts the case mouth square. For hand held turners, K&M used to make a very accurate one, somebody bought the business from original owner but believe they are making the same tool.
Best,
James
Wilson trimmers suck? I beg to differ. I've probably trimmed a few thousand .50 BMG with one and have absolutely no complaints. Only fifty trimmer I am aware of that really cuts the case mouth square. For hand held turners, K&M used to make a very accurate one, somebody bought the business from original owner but believe they are making the same tool.
Best,
James
Re: Good 50 bmg neck turner and case trimmer?
Thanks for all of the responses. I appreciate the input. Keep it coming if anyone has any other suggestions while I research the above reccomedations. Thanks again to those who took the time to respond.
Thanks for all of the responses. I appreciate the input. Keep it coming if anyone has any other suggestions while I research the above reccomedations. Thanks again to those who took the time to respond.
Re: Good 50 bmg neck turner and case trimmer?
Anyone had luck with this combo? http://www.kmshooting.com/catalog/50-cal...eck-turner.html
Anyone had luck with this combo? http://www.kmshooting.com/catalog/50-cal...eck-turner.html
