I know RL22 or RL25 is used but being in florida i want something that is not so temperature sensitive so RL is out. I see some great numbers from MagPro reported on some sights but not a lot of report here. I will be using 208amax and wanted to know which gives the best velocity, least temperature sensitive and easiest to meter. Thanks.
- Thread starter alpha6164
- Start date
Re: H1000, Retumbo or MagPro best for 300wm?
H1000 definitely.. Start at 75.0 and work up to max of 78.0 if using Win Brass, should get you to a sweet spot somewhere in that region.
H1000 definitely.. Start at 75.0 and work up to max of 78.0 if using Win Brass, should get you to a sweet spot somewhere in that region.
Re: H1000, Retumbo or MagPro best for 300wm?
300WM & MagPro is a great combo for me. I cannot comment on it temperature sensitivity as it relates to Florida type temps.
I personally don't buy into any of the slow burning stick powders being totally temperature insensitive.
300WM & MagPro is a great combo for me. I cannot comment on it temperature sensitivity as it relates to Florida type temps.
I personally don't buy into any of the slow burning stick powders being totally temperature insensitive.
Re: H1000, Retumbo or MagPro best for 300wm?
tag
tag
Re: H1000, Retumbo or MagPro best for 300wm?
76.4 H1000 with 210 vlds has got me running 2890 out of a SS 5r with a 26" barrel. Stabilty wise it's prob one of the best
76.4 H1000 with 210 vlds has got me running 2890 out of a SS 5r with a 26" barrel. Stabilty wise it's prob one of the best
Re: H1000, Retumbo or MagPro best for 300wm?
FPS: 2830-40 Powder: H-1000 76.0gr Bullet: SMK 220gr Case: Win Primer: Fed 215M
I also tried Retumbo but dont like it much with 220SMK. With the 208 A-Max it seem to work good.
Aron-
FPS: 2830-40 Powder: H-1000 76.0gr Bullet: SMK 220gr Case: Win Primer: Fed 215M
I also tried Retumbo but dont like it much with 220SMK. With the 208 A-Max it seem to work good.
Aron-
Re: H1000, Retumbo or MagPro best for 300wm?
210gr. Berger VLD
75.5gr. H-1000
Winchester Case
FGMM215M Primer
.002" off Lands
.300WM 26" Bartlein bbl.
WTC Build
210gr. Berger VLD
75.5gr. H-1000
Winchester Case
FGMM215M Primer
.002" off Lands
.300WM 26" Bartlein bbl.
WTC Build
Re: H1000, Retumbo or MagPro best for 300wm?
my TRG likes the H1000/208 AMAX combo, 77.0gr in Win cases, F215M.
my TRG likes the H1000/208 AMAX combo, 77.0gr in Win cases, F215M.
Re: H1000, Retumbo or MagPro best for 300wm?
If you have extra length in your magazine to seat the bullet out further, then I would use Retumbo. If you are seating it near factory length, then H1000 would be the ticket. Retumbo will get a little more velocity than H1000 with a 26"+ barrel. For ease, H1000 will work well.
If you have extra length in your magazine to seat the bullet out further, then I would use Retumbo. If you are seating it near factory length, then H1000 would be the ticket. Retumbo will get a little more velocity than H1000 with a 26"+ barrel. For ease, H1000 will work well.
Re: H1000, Retumbo or MagPro best for 300wm?
I forgot to post about Mag Pro. It is a great powder and will yield faster speeds. But it is VERY temp sensitive. I had a customer we did a WSM load with this powder. It was a slightly beyond max charge that shot extremely well. But when summer hit, he was blowing primers and locking up bolts.
I forgot to post about Mag Pro. It is a great powder and will yield faster speeds. But it is VERY temp sensitive. I had a customer we did a WSM load with this powder. It was a slightly beyond max charge that shot extremely well. But when summer hit, he was blowing primers and locking up bolts.
Re: H1000, Retumbo or MagPro best for 300wm?
71 gr h1000 230 berger 2850 chrono verified. 34" barrel nosler brass
71 gr h1000 230 berger 2850 chrono verified. 34" barrel nosler brass
Re: H1000, Retumbo or MagPro best for 300wm?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChadTRG42</div><div class="ubbcode-body">I forgot to post about Mag Pro. It is a great powder and will yield faster speeds. But it is VERY temp sensitive. I had a customer we did a WSM load with this powder. It was a slightly beyond max charge that shot extremely well. But when summer hit, he was blowing primers and locking up bolts. </div></div>
Thanks for the input. I spoke to Scott at Ramshot/Accurate and he himself recommended Ramshot Magnum over Magpro and said they have found it to be a lot more temp stable with similar velocities to Magpro. Is H-1000 a stick powder like Varget? Cause Varget is a bitch to meter.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChadTRG42</div><div class="ubbcode-body">I forgot to post about Mag Pro. It is a great powder and will yield faster speeds. But it is VERY temp sensitive. I had a customer we did a WSM load with this powder. It was a slightly beyond max charge that shot extremely well. But when summer hit, he was blowing primers and locking up bolts. </div></div>
Thanks for the input. I spoke to Scott at Ramshot/Accurate and he himself recommended Ramshot Magnum over Magpro and said they have found it to be a lot more temp stable with similar velocities to Magpro. Is H-1000 a stick powder like Varget? Cause Varget is a bitch to meter.
Re: H1000, Retumbo or MagPro best for 300wm?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: longrange30</div><div class="ubbcode-body">210gr. Berger VLD
75.5gr. H-1000
Winchester Case
FGMM215M Primer
.002" off Lands
.300WM 26" Bartlein bbl.
WTC Build</div></div>
LR30, Do you by chance have any velocity numbers for this load? My load data not available at this time, but I've only used RL22 for the 300Mag using 168 and 210 Berger VLD's and 180 Hornady's 180 SST. Interested in this thread. Want to play with a different powder myself. Thx.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: longrange30</div><div class="ubbcode-body">210gr. Berger VLD
75.5gr. H-1000
Winchester Case
FGMM215M Primer
.002" off Lands
.300WM 26" Bartlein bbl.
WTC Build</div></div>
LR30, Do you by chance have any velocity numbers for this load? My load data not available at this time, but I've only used RL22 for the 300Mag using 168 and 210 Berger VLD's and 180 Hornady's 180 SST. Interested in this thread. Want to play with a different powder myself. Thx.
Re: H1000, Retumbo or MagPro best for 300wm?
I would think H1000 is best for 208 AMAX. I use Retumbo but shoot the 230 OTM from Berger. It is the best 300WM load I have ever had.
I would think H1000 is best for 208 AMAX. I use Retumbo but shoot the 230 OTM from Berger. It is the best 300WM load I have ever had.
Re: H1000, Retumbo or MagPro best for 300wm?
Magnum and Mag Pro are ball powders, and H1000 is an extruded (stick) powder. Magnum has worked well in a few loads I have tried. I don't like using it to meter out of a charge master. I like using extruded powders better, and the Hodgdon Extreme powders are the best I've found.
Magnum and Mag Pro are ball powders, and H1000 is an extruded (stick) powder. Magnum has worked well in a few loads I have tried. I don't like using it to meter out of a charge master. I like using extruded powders better, and the Hodgdon Extreme powders are the best I've found.
Re: H1000, Retumbo or MagPro best for 300wm?
another vote for H1000
another vote for H1000
I just started using MAGPRO as I am saving my RETUMBO for the .338 LP and can’t find any H-1000. I live in NW AZ so I will find out how it works in the heat. Here are what my results so far,
Brass Federal , Powder MAGPRO, Primmer CCI 250 BULLETS 190 SMK, 200 BERGER 200 Hybrid Target. Shooting AI PSR 24 inch barrel. Load as follows:
190 SMK
78.7 GR
AVG FPS = 2989
COAL 3.420
200 Hybrid
78.7 GR
AVG FPS = 2978
COAL = 3.520
Brass Federal , Powder MAGPRO, Primmer CCI 250 BULLETS 190 SMK, 200 BERGER 200 Hybrid Target. Shooting AI PSR 24 inch barrel. Load as follows:
190 SMK
78.7 GR
AVG FPS = 2989
COAL 3.420
200 Hybrid
78.7 GR
AVG FPS = 2978
COAL = 3.520
