Help stuck need help!!!!

[Foul Mike]

I think that the grease in the bbl and a good rod and smack it should do the trick.
I have not had to do this very much, but a few times. Works good, FM

 

[rlwilson]

Did the OP ever reply back or get this out? (K Y and Rod gotta love it) should work though.

 

[KHOOKS]

I know this old gal that would suck that boresnake right outta there. But she is anti-gun bet she would not but her lips on it. LOL

Hell if the boresnake didn't come out the barrel will collapse around it.

 

[Maggot]

I know this old gal that would suck that boresnake right outta there. But she is anti-gun bet she would not but her lips on it. LOL

Hell if the boresnake didn't come out the barrel will collapse around it.

Couple of snorts of some good liquor should fix that.

 

[ACK]

I would remove the barrel from the upper receiver, chuck the barrel on a lathe and using a short spade drill (minimum flexure)peck at the center of the obstruction, once the material is removed it should collapse somewhat.

If you have no access to a lathe I would use a soldering iron and burn a hole through it. It will smoke!