Rifle Scopes Help with Nightforce NXS 5.5-22x56 Turret

[Panhead57]

I have a Non-Zero Stop 5.5-22x56 NXS with .25 MOA Turret adjustments (Model C231).

It’s mounted on a GAP 308 bolt rifle with a 20 MOA base.

When I zero the rifle at 100 yards, the rotation indicator line is at “4” (indicating 4 rotations from the bottom).

Is there a way to adjust this particular scope so that the rotation line is at the bottom with a 100 yard zero?

I have attached a couple of pictures for reference. When the outer cap is removed, there appear to be only two possible adjustment points.

Any advice will be appreciated!

 

[Trigger Monkey]

No, that isn't adjustable. After you zero, where it is is where it is. I used to infil the lines with a paint pen so I only saw one line when at zero. Seeing no line clued me in that I dialed under zero, seeing 2 lines meant I'm in the second Rev, etc...

 

[Panhead57]

Trigger Monkey - thanks for this information. Your paint infil method seems like a workeable solution.

I'll give it a try.