Guys I'm starting to reload the HPBT and I'd be so grateful if anyone has some of these factory loads with measurements please? COAL, CBTO, case length and shoulder to base. In ordinary times I'd go buy a box, but it's not ordinary right now! Thank you
Hornady American Gunner 6.5 CM factory measurements
- Thread starter atepointer
- Start date
Lemme save you some time...
140gr HPBT @ 2.81" COAL
Hornady brass
41.5gr H4350
Most any primer
There's a clone 140gr AG/Black load. That load right there has always been my go-to "easy button" and is right at or a hair under 1" @ 100yd 5-shot groups in a half-dozen different 6.5 Creedmoors I've owned.
If you want more velocity, 42.2-42.5gr H4350 should set you up nicely.
140gr HPBT @ 2.81" COAL
Hornady brass
41.5gr H4350
Most any primer
There's a clone 140gr AG/Black load. That load right there has always been my go-to "easy button" and is right at or a hair under 1" @ 100yd 5-shot groups in a half-dozen different 6.5 Creedmoors I've owned.
If you want more velocity, 42.2-42.5gr H4350 should set you up nicely.
