I received mine today along with .223 insert but, without any instructions. Anyone know of a link to a user guide etc? Thanks!
Hornady's bullet comparator instructions
- Thread starter p5200
- Start date
Re: Hornady's bullet comparator instructions
1) Thread the brass thumbscrew into the hole that pinches across the slot at one end.
2) Slide the red comparator body onto the stationary jaw of the caliper and lightly tighten the brass thumbscrew to lock it in place
3) Insert the 223 ogive insert into the red comparator body and use the little set screw to LIGHTLY lock it in place
4) Close caliper jaws and zero out the calipers
5) Insert loaded round into the calipers and measure the distance from base to ogive.
1) Thread the brass thumbscrew into the hole that pinches across the slot at one end.
2) Slide the red comparator body onto the stationary jaw of the caliper and lightly tighten the brass thumbscrew to lock it in place
3) Insert the 223 ogive insert into the red comparator body and use the little set screw to LIGHTLY lock it in place
4) Close caliper jaws and zero out the calipers
5) Insert loaded round into the calipers and measure the distance from base to ogive.
Re: Hornady's bullet comparator instructions
This is for the Stoney Pointe, However, they are the same! Hornady purchased them.
Hope it helps you!
Terry
This is for the Stoney Pointe, However, they are the same! Hornady purchased them.
Hope it helps you!
Terry
Similar threads
