I've got a B&C tactical medalist with the two sling studs on the forend. Is there a premade piece of pic rail that may go under the studs? I'd like to install a bipod but the forend is flat? I thought the picatinny might be more versatal.
Gunsmithing How to install Picatinny on B&C Medalist stock
- Thread starter waste_knot
- Start date
Re: How to install Picatinny on B&C Medalist stock
You can buy short pic rails all over the internet. I have seen some that are blanks that you could drill through to the same hole spacing as the factory studs if so inclined and able. Or pick up a pre-drilled rail then you just drill and tap the stock/alloy inner frame and you should be GTG.
You can buy short pic rails all over the internet. I have seen some that are blanks that you could drill through to the same hole spacing as the factory studs if so inclined and able. Or pick up a pre-drilled rail then you just drill and tap the stock/alloy inner frame and you should be GTG.
Re: How to install Picatinny on B&C Medalist stock
http://www.seekinsprecision.com/index.php?option=com_content&view=article&id=8&Itemid=46
http://www.seekinsprecision.com/index.php?option=com_content&view=article&id=8&Itemid=46
Re: How to install Picatinny on B&C Medalist stock
Similar product I saw a few months ago:
http://www.triadtactical.com/Accu-Shot-Atlas-Picatinny-Rail-Adapors.html
Similar product I saw a few months ago:
http://www.triadtactical.com/Accu-Shot-Atlas-Picatinny-Rail-Adapors.html
Re: How to install Picatinny on B&C Medalist stock
^^^^ Great finds. Can't get a much easier install than those.
^^^^ Great finds. Can't get a much easier install than those.
Re: How to install Picatinny on B&C Medalist stock
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roggom</div><div class="ubbcode-body">http://www.seekinsprecision.com/index.php?option=com_content&view=article&id=8&Itemid=46 </div></div>
This. I did one for a friend recently on his B&C M40 and it could not have been any simpler.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roggom</div><div class="ubbcode-body">http://www.seekinsprecision.com/index.php?option=com_content&view=article&id=8&Itemid=46 </div></div>
This. I did one for a friend recently on his B&C M40 and it could not have been any simpler.
