I need load data for .338 LM

[Tuc_3]

I loaded up some .338 LM and realized after the fact I read the charge weight for the powder above the powder I was using. I have the following:
Lapua Brass
Hornady 225gr SP
COAL 3.525"
and 93.1gr RL 25 x20 rounds
94.1gr RL 25 x10 rounds

Are either of these safe? I'll pull them if need be but as they are already loaded I'd kind of like to see how they perform. Again if they're safe.

 

[shoepop]

Re: I need load data for .338 LM

The 93.1 is fine the 94.1 should be as well. Shoot the 93.1 first.

 

[Tuc_3]

Re: I need load data for .338 LM

Thanks, its a little comforting. I am hoping for a few more supporting opinions though. I'm running it through a factory 700 MLR which I know isn't the strongest .338LM action but most of the concern seems to be from guys shooting 300gr bullets so I just don't know with the 225 if I'm safe or not.