Impact In KRG W3

[Blackice55]

I tried searching for a post from a while back with the modification required to set an impact 737 into a KRG chassis, I couldn’t find it so I was wondering if anyone had any pictures or advice. Also anyone that has a impact in a KRG have any issues?

 

[jzwolen]

I helped with a friends Whiskey/Impact combo. Started off with replacing the hex head screws with low-pro cap head hex screws. From there, a ton of dremel work where the trigger hanger/screws touch. Unfortunately, this includes shaving a ton off the top of the KRG screw that holds the magazine/trigger portion together.

It would look better milled out, but a dremel will do the job.

 

[Blackice55]

You have any pictures of it??

 

[spife7980]

KRG impact action mod

Im sure it's been covered in threads but after a ton of research I couldnt find a thread that covered WHAT exactly to file away. Hopefully this helps those who are going to run the krg impact action combo. This little ridge around the screw is what needed to be reduced. As well as a low...

www.snipershide.com

 

[Steel head]

KRG impact action mod

Im sure it's been covered in threads but after a ton of research I couldnt find a thread that covered WHAT exactly to file away. Hopefully this helps those who are going to run the krg impact action combo. This little ridge around the screw is what needed to be reduced. As well as a low...

www.snipershide.com

geez!
Don’t bother doing a search, let mommy spife tie your shoes for you.