im using a hornady 168 gn. A MAX bullets with hornady casings and cci primers. what powder and how much for 800+ yards? my mind is blown and i need some pro advice. im new to reloading so break it down for me please. thanks
input on a good load for a 700 sps tactical?
- Thread starter nemesisdominion
- Start date
Re: input on a good load for a 700 sps tactical?
Seriously! Just read in the reloading section- there's 10X the info for 308 than anything else.
Seriously! Just read in the reloading section- there's 10X the info for 308 than anything else.
Re: input on a good load for a 700 sps tactical?
That's exactly where i found some loads to try. I am shootin a 26" barreled Remington 308. I Just got back from the range this afternoon after testing a new load that is pretty basic but worked well. Five shots .6 Moa at a hundred yards and i couldn't miss the 12" gong at 450 yards with it. Just wish the range went farther here. Range was busy so i didn't set up my chrony today.
178 Amax
Virgin Lapua brass
44 Varget
cci BR2's
coal 2.805
For what its worth that load shot to the exact same point of impact as the other load i have been using at 100 yards.
168 Amax
Federal brass, once fired.
44.2 Reloader 15
cci BR2's
coal 2.805
average FPS was 2750
That's exactly where i found some loads to try. I am shootin a 26" barreled Remington 308. I Just got back from the range this afternoon after testing a new load that is pretty basic but worked well. Five shots .6 Moa at a hundred yards and i couldn't miss the 12" gong at 450 yards with it. Just wish the range went farther here. Range was busy so i didn't set up my chrony today.
178 Amax
Virgin Lapua brass
44 Varget
cci BR2's
coal 2.805
For what its worth that load shot to the exact same point of impact as the other load i have been using at 100 yards.
168 Amax
Federal brass, once fired.
44.2 Reloader 15
cci BR2's
coal 2.805
average FPS was 2750
