• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

JP Enterprises LRP-07 6.5CM Full Review

Lowlight

HMFIC of this Shit
Staff member
Moderator
Supporter
Minuteman
  • Apr 12, 2001
    35,601
    40,101
    Base of the Rockies
    www.snipershide.com
    [h=2]JP Enterprise LRP-07 Semi Auto Rifle Review[/h] <iframe width="560" height="315" src="https://www.youtube.com/embed/OjpsWt7ycW0" frameborder="0" gesture="media" allow="encrypted-media" allowfullscreen></iframe>

    Shooting semi-auto precision rifle is a closet passion of mine. Mainly because the large frame semi-auto rifles are so shooter dependent, you have to nail the fundamentals of marksmanship to be consistent. Technology is changing; no longer do we look down on the semi-auto platform as being inferior. You can build a sub MOA platform, and by that, I don’t mean one that shoots just under an inch, but instead, rifles that shoot sub 1/2 Inch groups.

    The JP Enterprises LRP-07 is one such rifle. From the outside the fit and finish on the LRP-07 are outstanding. Regarding specs, this example of a semi-auto precision rifle features the best JP has to offer:

    22″ Cryogenic Super Match Barrel chambered in 6.5CM
    LMOS or Low Mass Operating System with Silent Capture Spring.
    Machined Billet 7075-T6 upper and lower
    JP Adjustable Gas Block
    MKIII Handguard

    It all goes into the mix with this platform. From accuracy to fit & finish the LRP-07 checks all the boxes. [h=2]Shooting the LRP-07[/h]
    IMG_9511-1200x900.jpg


    The most accurate test of any rifle is on the range. Instead of just shooting a few test groups at 100 yards, we drove it out to distance. Shooting the LRP-07 from 100 to 1500 yards here in Colorado.

    The videos are all posted on YouTube, spoiler alert, this rifle hammers.

    Included with the rifle was a note to attempt the JP Challenge. That consists of hitting a target three times before the sound of the first impact returns to the shooters. It’s that one area where the accuracy of a bolt action rifle cannot compete with the speed and efficiency of a well-built semi-automatic platform. [h=4]So we took the JP at 1125 yards.[/h]
    Beforehand, I tried several different loads. As many knows, I shoot a ton of Prime Ammunition. But that does not mean I am not testing other brands or loads. You want a load that is tuned to the rifle, and I don’t just default to one specific brand when testing. I try a combination of ammo. In the case of the LRP-07, Prime was the least accurate out of the box. Shooting about 3/4″ groups at 100 yards, it was just okay. Both Hornady 143gr ELD ammo and Desert Tech 140gr 6.5CM shot better out of this rifle. But at a distance, I can make the Prime Ammo sing, it held it’s 100-yard accuracy, so it’s something I can make work.

    The first attempt out of the gate with Cain Luna from SRS, LLC spotting for me I nailed the Challenge. We have it all on video the only issue was the Go Pro sound was not working. But the results, a thing of beauty.

    Fired the first round to confirm the wind, and then immediately let three fly. Center hit, just left of center, and then low right. 1, 2, 3, smack.

    With a Time of Flight around 1.6 Seconds, that means you have to about 3 seconds of space to work inside. My 3 hits on steel were accomplished in 2.6 Seconds, impressively smooth shooting rifle. [h=2]The Second JP Challenge[/h]
    22382044_1576222865734564_9088768483567460056_o-980x900.jpg


    With winter quickly approaching and my travel schedule not slowing down, it was time to send the rifle back to JP Enterprises. But not before I take it out one last time.

    I wanted to try the JP Challenge again, this time at a closer target. A full-sized IPSC at 1125 is no joke to hit, but working the Challenge at 800 is going to be tough.

    The plan was to start with a few practice runs before trying it. I always film my practice attempts, what happens a lot, I will give something a go, and my first try is my best results. So press record on the camera. When you have a TOF of 1 second this becomes much harder.

    Both attempts were solid. The first which is at the beginning of the video was right on the edge of success. You have to be quick to catch on the first impact as the sound at the shooter is just behind the last shot. I hesitated the last hit trying to stay on the plate. The second attempt was money. Beat the sound by a wide margin. [h=2]Groups on Steel[/h]
    IMG_4563-1200x900.jpg
    JP Enterprise LRP-07 Side charging handle design
    So I filmed the JP Challenge at 800 yards, go down range and see a couple of groups on steel. The confirmation shots, and the speed hits. I get home to edit the footage and noticed the first group shot was sub 1/2 MOA. Talk about impressive. The second group was just over a minute, but it was shot pretty darn fast. All hits, just a bit larger than 1 MOA.

    <iframe src="https://www.facebook.com/plugins/video.php?href=https%3A%2F%2Fwww.facebook.com%2Fsnipershidellc%2Fvideos%2F10156008903432953%2F&show_text=0&width=560" width="560" height="314" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true" allowFullScreen="true"></iframe>


    The LRP-07 maintains it’s accuracy. When taking it out to distance, we used our XMETAL Targets, plate rack at 500 yards. The target is a pistol rack inverted for gravity resetting. Impressive precision rifle training rack because you don’t have to pull a cable to reset. Instead hit the 7th plate and the plates reset.

    Lots of weird, misplaced hate for the 6.5 Creedmoor, but the drop data is pretty good. This is with factory Prime 130gr Ammo going 2800fps
    IMG_9C158AB4FFEB-1-416x900.jpeg
    TRASOL DATA
    IMG_F86E7CCA27E1-1-416x900.jpeg
    TRASOL DATA[h=2]Conclusion[/h]
    SH_HD_JPE65-1-1600x900.jpg


    The video says this so much better than I can, the JP Enterprises LRP-07 is an easy bet. You will never lose your accuracy or your money investing in one of these rifles. It is a real semi-automatic precision rifle. You don’t have to search to find people singing the praises of JP Rifles; they are everywhere on the internet.

    I am not a comparison guy; I do not like picking favorites out of a group of favorites. If I didn’t have to present my opinion to the members of the Sniper’s Hide community, I would probably just put them all on the same #1 line in my head. But people demand choices, they love Top 10 Lists, and because of that, I am going to go out on a limb here. I am going to commit my Top 5 Precision Semi Auto Rifle list to paper.

    1. GA Precision GAP 10 – it started it all and my first .25 MOA Shooting Semi-Auto. Fun Fact GA Precision had a Soldier shoot an early GAP-10 around 2004 at the International Sniper Competition and won it. Reconcile the date of that achievement compared to the competition.

    2. JP Enterprises, while this is my first review, it is not my first outing with this platform. They dominate the accuracy discussions for a reason.

    3. Wilson Combat, genuinely outstanding semi-automatic precision rifles. Excellent accuracy, and stylish fit & finish

    4. POF – Yes, I love POF Rifles. I personally own 4 of them, and everyone shoots 3/8″ or better with factory ammo. You read that correctly, a Sub 1/2 MOA piston driver.

    5. Sig Sauer 716G2 DMR – I have seen outstanding shooting rifles from this platform.

    So there you go, my opinion based on having several brands and models. [h=2]Specs,[/h]
    Screen-Shot-2018-01-06-at-11.29.20-AM.png


    JP Enterprise Website

    Mile High Shooting Website

    Snipers Hide YouTube Channel

    Move JP Rifles Videos on our Channel
     
    • Like
    Reactions: marc.south1972
    Nice write-up and video. I have a JP-15 with the 18inch Rifle adjustable gas length light-weight BCG system and it is smooth to shoot and damn accurate. That side charging for the BCG seems in interesting- was it hard to adjust to? With a carbine type buffer system, you could have shorter stocks with more options on the cheek rest position.

    Surprised that in the article, that the KAC or LMT didn't make your top five.
     
    Frank, do you have any intentions of testing/ reviewing the FALKOR products with the new Drakos barrel???

    It would be awesome to see you put the Drakos barrel through it's paces, testing their Lifetime Warranty. Especially if you will pick up a 300 WM/300 NM or any other barrel burning Cartridge.

    As far as being innovative I think Falkor is the only rifle on the market they can give a JP a run for it's money.


     
    Last edited:
    Great review, thanks!
    I have their JP15 and a Grendel upper. The JP15 is crazy accurate with factory IMI 77gr and my loads.
    The Grendel I am still trying to get a decent load for.

    What was your opinion of that roller trigger?
    I installed Geissele NM's in mine adjusted pretty light.
     
    Great and timely article. I'm in the process of having JP build me an SCR-11 chassis system for my 224 Valkyrie build. Side charging setup has always interested me. Hope to have the JP barrel later this month.
     
    Larue OBR didn't make Frank's list... I'm shocked ;)
     
    It's also nice to see Frank finally come out of the closet...lol

    "Shooting semi-auto precision rifle is a closet passion of mine".
     
    was really glad to see this write up. It is one of my favorite rifles and favorite rounds. I have one in 308 and have been looking at getting a creedmoor upper. When I opened the box on mine it was like looking at a piece of fine jewelry....or a rolex or something. The fit and finish
    match its performance.......

    I really like the 6.5 creedmoor round for some reason. I have a creedmoor barrell for my DesertTech along with 338 LM, and I recently bought a
    Tikka T3x TAC A1 6.5 Creedmoor just to play with and compare.
     
    Last edited:
    I've read this write up 10+ times, cant wait for mine to get here!!!! Been 4 weeks and I feel like a kid who can't wait for x-mas. Patience isn't my strongest trait.
     
    Frank, that is also a passion of mine, and I don't even own a closet big enough for me to effectively hide within.

    My chosen platform is the Varmint AR-15, and I have a pair of Stag Model 6 Super Varminters with NATO chambers and (probably McGowan) 24" 1:8" barrels. One is factory and the other is home assembled to exactly the same configuration as my original Model 6 from the Stag factory kit and a Stag factory stripped receiver. We have two shooters in the household now, with our 21 Y/O Granddaughter, Elena.

    ...And wouldn't you know it, just after I bought the kit and receiver, Stag reshuffled their product line, and the Super Varminter is now a shorter heavy barreled AR chambered in 6.8. The closest current equivalent to the old Stag Model 6 Super Varminter is the new Stag 15 Varminter, updated with the Magpul Fixed Stock, which I would probably like if I had the chance.

    Since I'm shooting with the NATO chamber, I draw my longer distance line at 600yd, but expect fully well to see it do better at my own higher altitude, somewhere about/above 4,000ft ASL. Finding that 600+ or even 600 right now has not been a successful goal, aside from the Ben Avery 1000yd range, but that's at 1800ft ASL, and is also an overnight trip from my humble abode.

    I see the MR AR as a compromise that allows a reasonable extended distance challenge without the absolute necessity to find somewhere in the 1000yd class to shoot it.

    I'm wondering whether you've had the opportunity to weigh in with the Stag 6, or something closely like it; and where you feel it fits in alongside your closet passion.

    Greg