Hello..looking into getting a few mags for my 6.5 Creedmoor. What magazine do you guys prefer? I hear nothing but great things about both companies. Thank you in advance
Kac or, Larue 308 mags?
- Thread starter Raffica762
- Start date
The larue is better. But only a little. That said I use Lancers and Magpuls a lot. Both seem to work fine.
Look at this guy showing off his 2.875” long KAC.
But really, I have 10+ KAC mags, 1 Magpul, and 0 LaRue. KAC are good to go and no issues.
I have a few ASC and, C products 308 mags no issues what so ever..they both have longer than standard COAL ..not as much as KAC ..I got myself a KAC mag..thanks to a cool ass member here..can't wait to test it
I use KAC, MagPul and Lancer.
KAC and MagPul are fantastic. The KAC are metal, allow the longest overall length, and are very reliable. I use them regularly. At competitions when I’m shooting factory 140’s, and mags may get flung in the dirt, I’ve had EXCELLENT experience with MagPul. I can’t say I’ve ever had a magazine related stoppage with a MagPul....ever. Plus, they’re very affordable.
Lancers are awesome on paper. They seem to check all boxes. In MY experience, the springs are TOO STIFF. I can’t load 20 in my SR-25 or my GAP-10. If I manage to smash the 20th round in, it hangs up when chambering. I’ve tried tricks like leaving them loaded for days, hoping the spring would set, did nothing. I could probably look at aftermarket springs, but MagPul and KAC work is well, I’ve never bothered.
Just my experience, I shoot large frame AR’s quite a bit.
KAC and MagPul are fantastic. The KAC are metal, allow the longest overall length, and are very reliable. I use them regularly. At competitions when I’m shooting factory 140’s, and mags may get flung in the dirt, I’ve had EXCELLENT experience with MagPul. I can’t say I’ve ever had a magazine related stoppage with a MagPul....ever. Plus, they’re very affordable.
Lancers are awesome on paper. They seem to check all boxes. In MY experience, the springs are TOO STIFF. I can’t load 20 in my SR-25 or my GAP-10. If I manage to smash the 20th round in, it hangs up when chambering. I’ve tried tricks like leaving them loaded for days, hoping the spring would set, did nothing. I could probably look at aftermarket springs, but MagPul and KAC work is well, I’ve never bothered.
Just my experience, I shoot large frame AR’s quite a bit.
I use both KAC and Larue and have done so for a while. I see no discernible difference between the two. Both are head and shoulders above anything else. Quality of build and resulting reliability make them worth every penny
Similar threads
