If I need to adjust down past the zero stop to zero my rifle how do I do that. I tried what 8541 tactical said about doing it on the 624 but it didn’t work. Am I just at the bottom of travel.
Rifle Scopes Kahles 525i elevation adjustment
- Thread starter LC 6.5 Shooter
- Start date
Crank the scope to zero.
Fire a shot at the distance you want to zero.
Measure how far high you are with the reticle.
Loosen the two adjustment screws on the turret 1 turn.
Rotate the turret (no clicking should be heard) in the impact up direction to the number you measured.
Tighten the two screws to 8 in-lb.
Dial down to zero.
You should be zeroed and the zero stop set.
Before you start, if you can dial up past 29 Mils you’re already at at the bottom of your zero stop.
Fire a shot at the distance you want to zero.
Measure how far high you are with the reticle.
Loosen the two adjustment screws on the turret 1 turn.
Rotate the turret (no clicking should be heard) in the impact up direction to the number you measured.
Tighten the two screws to 8 in-lb.
Dial down to zero.
You should be zeroed and the zero stop set.
Before you start, if you can dial up past 29 Mils you’re already at at the bottom of your zero stop.
