Rifle Scopes Knights 34mm one piece mount???

[skinney_7]

Guys,
I have KAC 34mm once piece mount, but i only have NF NXS's, the mount is nice but don't want to give up any accuracy or chances of a loose scope by using spacers to take her down to 30mm, I'm wondering if there is gonna be a better chance of knocking my scope off zero, or haveing shift issues using the spacers as compared to downsizing to a solid 30mm mount??? I have always used high quality scope rings (NF, KAC, BO) but never used spacers, does anyone here run their rig with spacers or do you guys make sure and use the correct mm mount for your tube.
thanks.

 

[Guest]

Re: Knights 34mm one piece mount???

I have run a 1" scope in 30mm rings w/spacers and have had zero issues. Granted, this was in Badger rings and not KAC.

One thing I will say is that I had a KAC 1-piece mount with 30mm rings. No matter how tight I tightened the rings, the scope would slide back and forth in the mount. And this was with 5.56! Pathetic for the price they command.

Ditch the mount and buy an appropriate size from a better manufacturer

 

[USACS]

Re: Knights 34mm one piece mount???

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Pointblank4445</div><div class="ubbcode-body">I have run a 1" scope in 30mm rings w/spacers and have had zero issues. Granted, this was in Badger rings and not KAC.

One thing I will say is that I had a KAC 1-piece mount with 30mm rings. No matter how tight I tightened the rings, the scope would slide back and forth in the mount. And this was with 5.56! Pathetic for the price they command.

Ditch the mount and buy an appropriate size from a better manufacturer</div></div>
Same. I have Badger EBR rings with 1" reducer and NO issues. Solid.
And go to the NF Unimount.