Hi there - newbie post here ..... question for the hive mind : I have an RPA Quadlite action currently sat in a Bell & Carlson tactical stock. The stock was originally for a Rem700 S/A, but the RPA is a very close clone - except for the recoil lug. The RPA lug is further forward than the 700,and so in order to fit the stock I had to create a new slot and backfill the original with Devcon as part of the bedding process. Currently toying with the idea of a KRG Bravo chassis (again, Rem700 S/A) - but unsure if there would be enough "meat on the bone" on the alu chassis to create a new forward recoil slot. Anybody done this, or anyone have some decent photos of the Rem700 Bravo chassis to give me some idea ? Any thoughts/feedback appreciated. Thank you all !
KRG Bravo / RPA
- Thread starter jimbo68
- Start date
Mine has a thicker Tubb or Badger lug (I don't remember which -- we just re-used it for the latest re-barrel).
The KRG slot is more than big enough. My smith bedded the action to the chassis. All good.
The KRG slot is more than big enough. My smith bedded the action to the chassis. All good.
Last edited:
Similar threads
