I'm searching larue lt123 onepiece on the hide and i'm not coming up with anything.i'm mounting a nightforce 5.5-22x56 on a remington 700 sps tactical. I plan on changing out the hogue overmold stock once i can but will i need a cheek rise to get adequate cheek wield with these rings?? would they be to high for a stock without a cheek piece. if anyone has experience with this particular setup im all ears.
Rifle Scopes larue lt123 one piece to high
- Thread starter njnicky
- Start date
Re: larue lt123 one piece to high
I've used Larue's one piece mounts on my Savage 10 fcpk and without a cheek riser and it was definitely way too high. The larue one piece stuff are really meant to be mounted on AR type rifles and not bolties. I plan on using mine on an XLR chassis and I needed at least 1.1" ring height to clear my handguard. If you're gonna use that mount, unless you've got a freakishly long face you're probably gonna need something to get your eye level up higher to the center of the scope reliably. You'd probably be better off with their 2 piece 1.28" rings imo but even then you might still want something to bring ur eye level higher.
I've used Larue's one piece mounts on my Savage 10 fcpk and without a cheek riser and it was definitely way too high. The larue one piece stuff are really meant to be mounted on AR type rifles and not bolties. I plan on using mine on an XLR chassis and I needed at least 1.1" ring height to clear my handguard. If you're gonna use that mount, unless you've got a freakishly long face you're probably gonna need something to get your eye level up higher to the center of the scope reliably. You'd probably be better off with their 2 piece 1.28" rings imo but even then you might still want something to bring ur eye level higher.
Similar threads
