Throwing this up since i could use a little money. If i can't get my asking price i am just going to keep it.
Not looking for any trades of any kind at the moment.
I put this together myself using a forster go and no go guage. The rifle has at a minimum 480 rounds through it. I know i shot one match that i didn't log in the book but i know the round count is under 600 rounds fired.
Tl3 action (dlc body, standard bolt coating)
Arc barloc
26" criterion match barrel 1-7twist
Triggertech diamond pro curve trigger
Accurate 10rd mag
Mpa comp lefty chassis with castle cut and inclinometer, nv bridge, arca spigot mount. The bag rider is angled with a block of wood dowel and i can remove it easily if you don't like the angle.
70 rounds of reloads ( 205m primer, 8208xbr, 77gr tmk, lapua/norma brass.
I have a couple hundred pieces of primed and fully prepped brass to go with it as well but they're primed with winchester primers. It's all lapua/norma as well. All brass is on its 2nd to 3rd firing and has been separated in to batches. Annealed after each firing as well.
The rifle is a smooth and very consistent shooter. Recoil is basically non existent with the weight of the build. Not sure the exact weight and i don't want to quote the bathroom scale but it's around 14-18lbs with scope. I did cut the over hang off the scope rail so the barloc could work. I built this up as a trainer but i haven't shot it in a year. The rat rail also has some dings from the bipod.
Price is $2500 for everything. Id like to sell this locally (San Antonio) so interested buyers can shoot it before making a decision but id be open to shipping if someone is willing to cover shipping costs.
Not looking for any trades of any kind at the moment.
I put this together myself using a forster go and no go guage. The rifle has at a minimum 480 rounds through it. I know i shot one match that i didn't log in the book but i know the round count is under 600 rounds fired.
Tl3 action (dlc body, standard bolt coating)
Arc barloc
26" criterion match barrel 1-7twist
Triggertech diamond pro curve trigger
Accurate 10rd mag
Mpa comp lefty chassis with castle cut and inclinometer, nv bridge, arca spigot mount. The bag rider is angled with a block of wood dowel and i can remove it easily if you don't like the angle.
70 rounds of reloads ( 205m primer, 8208xbr, 77gr tmk, lapua/norma brass.
I have a couple hundred pieces of primed and fully prepped brass to go with it as well but they're primed with winchester primers. It's all lapua/norma as well. All brass is on its 2nd to 3rd firing and has been separated in to batches. Annealed after each firing as well.
The rifle is a smooth and very consistent shooter. Recoil is basically non existent with the weight of the build. Not sure the exact weight and i don't want to quote the bathroom scale but it's around 14-18lbs with scope. I did cut the over hang off the scope rail so the barloc could work. I built this up as a trainer but i haven't shot it in a year. The rat rail also has some dings from the bipod.
Price is $2500 for everything. Id like to sell this locally (San Antonio) so interested buyers can shoot it before making a decision but id be open to shipping if someone is willing to cover shipping costs.
Last edited:
