Need help with a load. Mainly bullets and powder. What are the best bullets for 500-1000 yard bullets, and what's the best grain amount For that range?
Load for a 7wsm
- Thread starter mike1113
- Start date
Re: Load for a 7wsm
What is your barrel length and twist?
Also, start here
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=349882#Post349882
What is your barrel length and twist?
Also, start here
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=349882#Post349882
Re: Load for a 7wsm
yes. Go have a look in teh reloading section; there are tone of loads discussed in there, including mine.
yes. Go have a look in teh reloading section; there are tone of loads discussed in there, including mine.
Re: Load for a 7wsm
500-1000 with 7WSM. Will need to know what you are shooting. twist mostly.
I used 180 bergers and 180JLK with retumbo, 8.5 twist. Doesn't work as good on some rifles. My win coyote I use 175SMK with H4831sc, 9.5 twist? Never tried the 180s in the coyote.
500-1000 with 7WSM. Will need to know what you are shooting. twist mostly.
I used 180 bergers and 180JLK with retumbo, 8.5 twist. Doesn't work as good on some rifles. My win coyote I use 175SMK with H4831sc, 9.5 twist? Never tried the 180s in the coyote.
Re: Load for a 7wsm
A barrel with a 1:9 twist rate will stabilize the 180gr Bergers just fine. I also use Reloader 22 for powder (62.2 grs) since it is less temperature sensitive than most others.
62.2 grs is a light load by the way but I start damaging brass pushing to get to the next higher accuracy node since I only have a 24" barrel. Need to rectify that when I rebarrel...
A barrel with a 1:9 twist rate will stabilize the 180gr Bergers just fine. I also use Reloader 22 for powder (62.2 grs) since it is less temperature sensitive than most others.
62.2 grs is a light load by the way but I start damaging brass pushing to get to the next higher accuracy node since I only have a 24" barrel. Need to rectify that when I rebarrel...
Re: Load for a 7wsm
Probably another Bartlein as the accuracy is awesome. Will go with a lighter contour though and either go 26" plus a Badger Thruster brake or 28" with no brake.
It sucks knowing I am pissing away so much velocity but I don't want to replace brass constantly so I am stuck for now.
Probably another Bartlein as the accuracy is awesome. Will go with a lighter contour though and either go 26" plus a Badger Thruster brake or 28" with no brake.
It sucks knowing I am pissing away so much velocity but I don't want to replace brass constantly so I am stuck for now.
Re: Load for a 7wsm
66 grains for RL 25 and the 180 Berger its Max and Fast This is my F Open Load.
62 Grains of H4831 SC and the 180 Berger is also a great load
66 grains for RL 25 and the 180 Berger its Max and Fast This is my F Open Load.
62 Grains of H4831 SC and the 180 Berger is also a great load
Re: Load for a 7wsm
67 grs of H1000 pushes the 175 SMK out of my 27" Broughton 5C barrel at just over 3000 fps.
It's a max load but very accurate as it's shot quite a few
5-shot groups in the 4"-6" range at 1K,.
Wayne aka WAMBO
67 grs of H1000 pushes the 175 SMK out of my 27" Broughton 5C barrel at just over 3000 fps.
It's a max load but very accurate as it's shot quite a few
5-shot groups in the 4"-6" range at 1K,.
Wayne aka WAMBO
Re: Load for a 7wsm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A10XRIFLE</div><div class="ubbcode-body">66 grains for RL 25 and the 180 Berger its Max and Fast This is my F Open Load.
</div></div>For me this is a mild load but I load to 3.00. I have recently discovered that 25 yields better velocity at MUCH lower pressure than 22. I'm still working with 25 but so far I am up to 67.5 with zero pressure signs. My 7 is finicky and the slightest bit of pressure gives me stiff bolt lift even with no other signs.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A10XRIFLE</div><div class="ubbcode-body">66 grains for RL 25 and the 180 Berger its Max and Fast This is my F Open Load.
</div></div>For me this is a mild load but I load to 3.00. I have recently discovered that 25 yields better velocity at MUCH lower pressure than 22. I'm still working with 25 but so far I am up to 67.5 with zero pressure signs. My 7 is finicky and the slightest bit of pressure gives me stiff bolt lift even with no other signs.
Similar threads
