Sincerd Drone Full Member Minuteman Supporter Dec 29, 2019 925 274 Freestate Oct 28, 2022 #1 Oct 28, 2022 #1 What's your process when batch/bulk loading for multiple rifles? What loads have worked well for you? Specifically 308 and 6.5cm? Reactions: simonp
What's your process when batch/bulk loading for multiple rifles? What loads have worked well for you? Specifically 308 and 6.5cm?
C cruze5 Gunny Sergeant Full Member Minuteman Nov 11, 2006 725 109 Kentucky Oct 29, 2022 #2 Oct 29, 2022 #2 i still have the screen shot back when we were on scout.com from George Gardner Good Rule of thumb is federal and black hills 168 and 175 handloads: using Varget or 4064 or tac or RL 43.5 with 168 bullets 42.5 with 175's Reactions: simonp
i still have the screen shot back when we were on scout.com from George Gardner Good Rule of thumb is federal and black hills 168 and 175 handloads: using Varget or 4064 or tac or RL 43.5 with 168 bullets 42.5 with 175's
Doom Balding Eagle Full Member Minuteman Mar 24, 2013 1,316 1,108 South of the Mason Dixon Line. Oct 29, 2022 #3 Oct 29, 2022 #3 308 ~43 grains 4064 168SMK Federal or LC brass ~42 grains IMR 4064 175 SMK Federal or LC brass These are similar to FGMM from several years back. .2 to .3 grains higher in Winchester cases. You know the drill. Work up the loads. Reactions: simonp
308 ~43 grains 4064 168SMK Federal or LC brass ~42 grains IMR 4064 175 SMK Federal or LC brass These are similar to FGMM from several years back. .2 to .3 grains higher in Winchester cases. You know the drill. Work up the loads.
steve podleski Private Full Member Minuteman Nov 26, 2005 598 435 Nov 1, 2022 #4 Nov 1, 2022 #4 45gr of Varget in Lapua case with 168TMK...supersonic at 1000yd out of 24" AR10.
