- Thread starter rowcifer
- Start date
Art Luppino, Ted Brown, those two are over on the M14forum. Might check them out.
About 10 years ago Smith Ent. rebarreled my M1A, put it in a McMillan and made it ready for HP Service Rifle competition. The rifle shot very well and Smith Ent. was very easy to work with.
Now that I shoot an AR in HP Service Rifle I wanted to put some glass on the M1A. Ultimately, I decided to put it into a SAGE chassis with a "Smith Top" for the scope mount. I ran into some problems getting it apart so I called up Smith Ent. and spoke with Jack. I sent him the rifle and had it back within a week. Great customer service and great work on the rifle.
Now that I shoot an AR in HP Service Rifle I wanted to put some glass on the M1A. Ultimately, I decided to put it into a SAGE chassis with a "Smith Top" for the scope mount. I ran into some problems getting it apart so I called up Smith Ent. and spoke with Jack. I sent him the rifle and had it back within a week. Great customer service and great work on the rifle.
Here is a list. I highly recommend McCaskill and John Wolfe. There is a guy at the bottom of the list that is in FL. so that might be close to you and that is a plus with shipping costs and hassles today. good luck.
The Shooters Den - Ted Brown
7025 Whitewater Dr., Jacksonville, OR 97530
Phone: 541-899-8109
E-mail: [email protected] or [email protected]
Ted Brown dba Shooters Den
************************************************** **************
Smith Enterprise Inc-Ron Smith
1701 West 10th Street, Suite 14
Tempe, Arizona 85281
Phone: (480) 964-1818
FAX: (480) 921-9987
Email: [email protected]
Smith Enterprise, Inc.
Note: Does Chinese to USGI bolt conversions
************************************************** **************
Heart Mountain Precision Machining
Dave Ferrante
870 Road 19
Powell, WY 82435
Ph. 307-754-1555
eMail: [email protected]
************************************************** **************
The Firingline
Mike Friend
69400 E. Hwy 60
Wyandotte, OK 74370
Ph. 918.666.2788
email: [email protected]
Note: Does Chinese to USGI bolt conversions.
************************************************** **************
Match Armorers Shop
Geoffrey Corn
RR# 3 Box 66-A
Oakland City , Ind 47660
1-812- 749-6416
[email protected]
************************************************** **************
Wolfe, Jonathan York
1335 Blanton St
Columbus, NC 28722
M14 & M1A Parts and Armory Services
************************************************** **************
ALL AMERICAN GUNSMITHING
KEITH MORRIS - OWNER
120 SARAH LANE
MIDDLETOWN, NY 10941
Ph. 845- 692-6615
E- MAIL- [email protected]
http://www.allameric...g.com/home.html
************************************************** **************
Tank's
1777 County Road 20
Fremont NE 68025
Ph. (402)727-1317
[email protected]
http://www.tanksrifl...om/m1garand.htm
************************************************** **************
Angus Arms Co. - Gus Norcross
Wiscassett, Maine
email][email protected][/email]
Angus Arms
************************************************** **************
National Match Armory
Eric Pierce
5145 FM 1187 E.
Burleson, TX 76028
Shop Phone/Message Center: 817.478.5721
Mobile (if no answer at the above): 817-874-9115
email us at: [email protected]
National Match Armory
************************************************** **************
Cassatt Gun Works
Isaac McCaskill
1979 Lake Elliott Rd
Cassatt, SC 29032
803-713-USMC
************************************************** **************
Match Service Works
Ron Morris
422 Maple St
Madison TN 37115
Phone# 615-868-4567
email: [email protected]
************************************************** **************
Larry Kimpell
El Paso, TX
(915) 751-0406
[email protected]
************************************************** **************
T.L.C. Gunworks
Tom Luhmann
225 San Jose
Clovis, CA 93612
(559) 299-7112
************************************************** **************
Charlie Maloney
Located in Catonsville, Maryland
Business E-Mail: [email protected]
Charles W. Maloney - National Match Gunsmith
************************************************** **************
Mathewson Tool Company
John Matthews
(408) 353 4867
[email protected]
************************************************** **************
Accuracy Speaks, Inc.
Derrick Martin
3960 North Usery Pass Rd.
Mesa, Arizona 85207
(480) 373-9499
[email protected]
Welcome to Accuracy Speaks Parts & Gunsmithing
************************************************** **************
Arrington Accuracy Works
Scottsdale, AZ
PH.# 623-582-5066 - FAX# 623-582-5992
E-MAIL [email protected]
Arrington Accuracy Works
************************************************** **************
Gruning Precision
Riverside, CA
(951) 283-6915
[email protected]
Gruning Precision: tactical rifles, Remington 700, M1A, M14, AR15, AR10, scope rings, scope bases, tactical accessories, Riverside, California
Note: For shipping address, please e-mail or call.
************************************************** **************
Fulton Armory
8725 Bollman Place #1
Savage, Maryland 20763
1-301-490-9485
1-301-490-9547 Fax
E-Mail [email protected]
Fulton Armory | Home
************************************************** **************
Dow Arms Room
Bruce Dow
19250 US Highway 301
Dade City, FL 33523
352.567.9800
************************************************** **************
The Shooters Den - Ted Brown
7025 Whitewater Dr., Jacksonville, OR 97530
Phone: 541-899-8109
E-mail: [email protected] or [email protected]
Ted Brown dba Shooters Den
************************************************** **************
Smith Enterprise Inc-Ron Smith
1701 West 10th Street, Suite 14
Tempe, Arizona 85281
Phone: (480) 964-1818
FAX: (480) 921-9987
Email: [email protected]
Smith Enterprise, Inc.
Note: Does Chinese to USGI bolt conversions
************************************************** **************
Heart Mountain Precision Machining
Dave Ferrante
870 Road 19
Powell, WY 82435
Ph. 307-754-1555
eMail: [email protected]
************************************************** **************
The Firingline
Mike Friend
69400 E. Hwy 60
Wyandotte, OK 74370
Ph. 918.666.2788
email: [email protected]
Note: Does Chinese to USGI bolt conversions.
************************************************** **************
Match Armorers Shop
Geoffrey Corn
RR# 3 Box 66-A
Oakland City , Ind 47660
1-812- 749-6416
[email protected]
************************************************** **************
Wolfe, Jonathan York
1335 Blanton St
Columbus, NC 28722
M14 & M1A Parts and Armory Services
************************************************** **************
ALL AMERICAN GUNSMITHING
KEITH MORRIS - OWNER
120 SARAH LANE
MIDDLETOWN, NY 10941
Ph. 845- 692-6615
E- MAIL- [email protected]
http://www.allameric...g.com/home.html
************************************************** **************
Tank's
1777 County Road 20
Fremont NE 68025
Ph. (402)727-1317
[email protected]
http://www.tanksrifl...om/m1garand.htm
************************************************** **************
Angus Arms Co. - Gus Norcross
Wiscassett, Maine
email][email protected][/email]
Angus Arms
************************************************** **************
National Match Armory
Eric Pierce
5145 FM 1187 E.
Burleson, TX 76028
Shop Phone/Message Center: 817.478.5721
Mobile (if no answer at the above): 817-874-9115
email us at: [email protected]
National Match Armory
************************************************** **************
Cassatt Gun Works
Isaac McCaskill
1979 Lake Elliott Rd
Cassatt, SC 29032
803-713-USMC
************************************************** **************
Match Service Works
Ron Morris
422 Maple St
Madison TN 37115
Phone# 615-868-4567
email: [email protected]
************************************************** **************
Larry Kimpell
El Paso, TX
(915) 751-0406
[email protected]
************************************************** **************
T.L.C. Gunworks
Tom Luhmann
225 San Jose
Clovis, CA 93612
(559) 299-7112
************************************************** **************
Charlie Maloney
Located in Catonsville, Maryland
Business E-Mail: [email protected]
Charles W. Maloney - National Match Gunsmith
************************************************** **************
Mathewson Tool Company
John Matthews
(408) 353 4867
[email protected]
************************************************** **************
Accuracy Speaks, Inc.
Derrick Martin
3960 North Usery Pass Rd.
Mesa, Arizona 85207
(480) 373-9499
[email protected]
Welcome to Accuracy Speaks Parts & Gunsmithing
************************************************** **************
Arrington Accuracy Works
Scottsdale, AZ
PH.# 623-582-5066 - FAX# 623-582-5992
E-MAIL [email protected]
Arrington Accuracy Works
************************************************** **************
Gruning Precision
Riverside, CA
(951) 283-6915
[email protected]
Gruning Precision: tactical rifles, Remington 700, M1A, M14, AR15, AR10, scope rings, scope bases, tactical accessories, Riverside, California
Note: For shipping address, please e-mail or call.
************************************************** **************
Fulton Armory
8725 Bollman Place #1
Savage, Maryland 20763
1-301-490-9485
1-301-490-9547 Fax
E-Mail [email protected]
Fulton Armory | Home
************************************************** **************
Dow Arms Room
Bruce Dow
19250 US Highway 301
Dade City, FL 33523
352.567.9800
************************************************** **************
Thanks... I will contact him. I can't ship it, nor do I know how it'll work since it's a USGI M14. if he isn't Class III, I either have to be there when he works on it, or I don't know if he can lol.
I'm only looking to do non permanent changes to the rifle. If gov wants his rifle back, I will have to put it back to stock configuration.
Just spoke with Bruce from Dow Arms Room. for Class III work (if it's for a LEA) he needs a letter showing the rifle is assigned to us, and a letter explicitly showing what needs to be done to the rifle. Reviews seem very good for him, and he said turn around can be fairly quick. I will update you guys on what's going on with it. For now, I need to get some time and just shoot these things first after a thorough cleaning.
About 10 years ago Smith Ent. rebarreled my M1A, put it in a McMillan and made it ready for HP Service Rifle competition. The rifle shot very well and Smith Ent. was very easy to work with.
Now that I shoot an AR in HP Service Rifle I wanted to put some glass on the M1A. Ultimately, I decided to put it into a SAGE chassis with a "Smith Top" for the scope mount. I ran into some problems getting it apart so I called up Smith Ent. and spoke with Jack. I sent him the rifle and had it back within a week. Great customer service and great work on the rifle.
I like the sage chassis, but sadly it is not an option considering where I live. If I do have one built, it will have to be neuterd.
Great list. Thank you.
I haven't had a rifle built by Bruce Dow but have been to his shop and seen his work. I would not hesitate to have Bruce work on a M14/M1A.
