Here's a site I thought I'd share with up and coming machinists
/gunsmiths;
http://www.frets.com/HomeShopTech/hstpages.html
/gunsmiths;
http://www.frets.com/HomeShopTech/hstpages.html
Gunsmithing machining site
- Thread starter LSandBinc
- Start date
Re: machining site
Thanks, It is now in my favorites.
Thanks, It is now in my favorites.
Re: machining site
tag
tag
Re: machining site
Great site! Thanks for the link.
Great site! Thanks for the link.
Re: machining site
Helpful. Thanks. In the favorites now.
Helpful. Thanks. In the favorites now.
Re: machining site
Good lookin out amigo. Good stuff.
Good lookin out amigo. Good stuff.
Re: machining site
Some neat stuff here, but some that may borderline OCD as well, lol. None the less very interesting.
Some neat stuff here, but some that may borderline OCD as well, lol. None the less very interesting.
Re: machining site
Does anyone have any other Machining sites for us wanna-bee / interested in learning about machining?
Does anyone have any other Machining sites for us wanna-bee / interested in learning about machining?
Re: machining site
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Slowandsteady</div><div class="ubbcode-body">Does anyone have any other Machining sites for us wanna-bee / interested in learning about machining? </div></div>
Try this; http://www.americanmachinetools.com/how_to_use_a_lathe.htm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Slowandsteady</div><div class="ubbcode-body">Does anyone have any other Machining sites for us wanna-bee / interested in learning about machining? </div></div>
Try this; http://www.americanmachinetools.com/how_to_use_a_lathe.htm
Re: machining site
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ARShuter</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Slowandsteady</div><div class="ubbcode-body">Does anyone have any other Machining sites for us wanna-bee / interested in learning about machining? </div></div>
Try this; http://www.americanmachinetools.com/how_to_use_a_lathe.htm</div></div>
Here's another: http://www.practicalmachinist.com/ There is also a gunsmithing forum towards the bottom.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ARShuter</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Slowandsteady</div><div class="ubbcode-body">Does anyone have any other Machining sites for us wanna-bee / interested in learning about machining? </div></div>
Try this; http://www.americanmachinetools.com/how_to_use_a_lathe.htm</div></div>
Here's another: http://www.practicalmachinist.com/ There is also a gunsmithing forum towards the bottom.
Re: machining site
Right on guys, thanks.
Right on guys, thanks.
Re: machining site
thanks for posting that link. i have been sweeping my tailstock in with a tenth indicator and a magnetic base on my chuck for precision work. this method looks great for a quick check. mounting a tenth indicator on the carriage and running along the top and side of this would also show exactly how far the tailstock is off.
http://www.frets.com/HomeShopTech/QuickTricks/TailstockAlignment/tailstockalignment.html
thanks for posting that link. i have been sweeping my tailstock in with a tenth indicator and a magnetic base on my chuck for precision work. this method looks great for a quick check. mounting a tenth indicator on the carriage and running along the top and side of this would also show exactly how far the tailstock is off.
http://www.frets.com/HomeShopTech/QuickTricks/TailstockAlignment/tailstockalignment.html
Re: machining site
Yeah worked great for me only thing I found my tail is .003 higher than my chuck. Now I'm at a loss how to even this out.
Yeah worked great for me only thing I found my tail is .003 higher than my chuck. Now I'm at a loss how to even this out.
Re: machining site
tag..........
tag..........
