Magazine mod for single feed; Ruger RPR

[Lumpybrass]

I read where somebody used a piece of PVC pipe to fashion a magazine block to add ease of single round loading on a Ruger RPR.
I assume fits into the mag.
Anybody know of this trick?

 

[trob_205]

I’d just buy an AICS pattern Magpul mag and it won’t lock the bolt to the rear on an empty chamber.

 

[Racer88]

I like the "Original Bob Sled." The .308 sled works perfectly in my 6.5CM RPR.

http://www.originalbobsled.com/BoltGunSleds.aspx

 

[LongRangeLefty]

I use a Bob Sled. Also if you grind down the corner of the bolt stop, there will be no more bolt stop

 

[ChrisH56]

I made the pvc pipe single load follower out of 1/2 inch pvc pipe. It was listed on the old Snipers Hide forum site. Luckily I saved pictures from the original post. You just slide it in the mag like a cartridge over the magazinr follower.

 

[Lumpybrass]

That's what I was looking for. Thanks Chris.
I'll make one today.