Selling a Manners T4A carbon elite that I never got around to using. This is a catch and release
from a hide member. Has never been bedded or shot out of. I’m also including brand new Badger DBM.
$825 shipped to your door with the DBM and pillars. PayPal FF or you cover the fees. Doesn’t bother me either way
full disclosure, at some point I was test fitting an action and pulled the action out without pulling the bolt up and it chipped a small piece off the stock. You can see the chip in the pictures. I have the piece so it can be epoxied back on or you could sand the chip and touch it up with some gel or paint and you’d never know it.
-Inlet for a right hand Remington 700 Short Action.
-Elite Tactical Shell (100% Carbon Fiber)
-Heavy Palma Barrel Contour (Unless otherwise specified)
-Badger Ordnance M5 DBM Inlet.
-Elite Tactical Shell weighs approximately 2.8 lbs.
-Comes standard with a fixed 1” Pachmayer Decelerator Pad.
-Adjustable cheek piece.
-The overall length of the stock is 32 inches.
-The forend width is 2.4” and is wide enough to accept a 1.35” straight taper barrel.
- 2 flush cups left side
-Bipod Stud Front, 2 Flush Cups Left Hand Side
Thanks for looking! Feel free to ask any questions if I missed anything.
-Crash
from a hide member. Has never been bedded or shot out of. I’m also including brand new Badger DBM.
$825 shipped to your door with the DBM and pillars. PayPal FF or you cover the fees. Doesn’t bother me either way
full disclosure, at some point I was test fitting an action and pulled the action out without pulling the bolt up and it chipped a small piece off the stock. You can see the chip in the pictures. I have the piece so it can be epoxied back on or you could sand the chip and touch it up with some gel or paint and you’d never know it.
-Inlet for a right hand Remington 700 Short Action.
-Elite Tactical Shell (100% Carbon Fiber)
-Heavy Palma Barrel Contour (Unless otherwise specified)
-Badger Ordnance M5 DBM Inlet.
-Elite Tactical Shell weighs approximately 2.8 lbs.
-Comes standard with a fixed 1” Pachmayer Decelerator Pad.
-Adjustable cheek piece.
-The overall length of the stock is 32 inches.
-The forend width is 2.4” and is wide enough to accept a 1.35” straight taper barrel.
- 2 flush cups left side
-Bipod Stud Front, 2 Flush Cups Left Hand Side
Thanks for looking! Feel free to ask any questions if I missed anything.
-Crash
Attachments
-
F811FFA9-BE0D-45CD-A401-BC447645DDD9.jpeg589.1 KB · Views: 164
-
90868FA4-DF6B-4CC6-A06D-585A6707C71D.jpeg1.1 MB · Views: 180
-
7A4C5B84-BB9B-494F-BD97-E4BEE8828286.jpeg484.8 KB · Views: 161
-
DF10AF5D-C8C6-4C10-95AD-9B40F37215DD.jpeg596.8 KB · Views: 153
-
B8F67137-68B1-4558-B6A8-DA678188F2FF.jpeg740.4 KB · Views: 173
Last edited: