Thought this video might help others! Keith Glasscock is a very well known fclass champion and a respected shooter who’s stepped into prs and had this to say about the March.
March PRS Scope review.
- Thread starter Onebadstang16
- Start date
Man not sure where to start. I have shot and been behind these before on other peoples guns but never setup for ME.
Leveled and mounted into a Spuhr 4602C. Got the Diopter set correctly.
HOLY SHIT!
The glass quality, reticle, FOV and Eyebox on this thing is absolutely incredible. Clicks are very tactile, every knob is smooth.
I took this out to a spot I check about 750 yards, rolling Mi rage I can rarely make out the numbers on the post unless its a calm/coolish day. In rolling mirage I cranked this thing up to 42 power and can see the wood grains on this damn pole. Its like it sees THROUGH the mirage while still being able to see it flow and the direction its going.
I have owned them all. Gen 3 Razors, Tangents, ZCO, NF, S&B, Minox ect ect ect. My biggest challenge for me is seeing targets in mirage. Often I have to shoot where I think a target is, not where i can clearly see it. Especially on shot up KYLs. When I say this March puts my ZCO's to shame, It really does. Not only can I shoot on much higher power with the same FOV, but I can clearly see target detail for the first time ever. Eyebox on max power is much more forgiving than my ZCO840 or even 527.
Thank you to @Patty @Shayne Ward and @Onebadstang16 for showing and recommending these.
Leveled and mounted into a Spuhr 4602C. Got the Diopter set correctly.
HOLY SHIT!
The glass quality, reticle, FOV and Eyebox on this thing is absolutely incredible. Clicks are very tactile, every knob is smooth.
I took this out to a spot I check about 750 yards, rolling Mi rage I can rarely make out the numbers on the post unless its a calm/coolish day. In rolling mirage I cranked this thing up to 42 power and can see the wood grains on this damn pole. Its like it sees THROUGH the mirage while still being able to see it flow and the direction its going.
I have owned them all. Gen 3 Razors, Tangents, ZCO, NF, S&B, Minox ect ect ect. My biggest challenge for me is seeing targets in mirage. Often I have to shoot where I think a target is, not where i can clearly see it. Especially on shot up KYLs. When I say this March puts my ZCO's to shame, It really does. Not only can I shoot on much higher power with the same FOV, but I can clearly see target detail for the first time ever. Eyebox on max power is much more forgiving than my ZCO840 or even 527.
Thank you to @Patty @Shayne Ward and @Onebadstang16 for showing and recommending these.
Awesome to hear man!! Feel free to reach out if you have any questions or need anything and we’ll see ya at a match in the future!
So how would this be on a rimfire, parallax forgiving enough to go from a 35 yd KYL to say a 2.5” hanger at 150 yds? When you have to alternate between the KYL and the far target every shot from 5 different positions, if parallax was set at say 60 can you see the 1/4” KYL and still make out the far target at 12-20X? By the way, I hate it when they do this, nothing should be closer than 50.
For comparison I’m using a gen 3 razor at the moment.
Where’s a good place to buy?
What’s a good price?
PM me if necessary,
Thanks
