R700SA inlet
Surgeon DBM inlet
2 cups left side
One sling stud
So this was originally inletted R700SA, rem varmint barrel channel, surgeon DBM that I opened up to accept an M40.
The recoil lug area was for a factory 700. I very crudely opened it up to accept a .350 lug. I never touched the rear area of the lug just the forward area.
It was bedded for a R700 action. I had to remove the bedding forward of the recoil lug in order to open it up. It's not pretty but I will all be hidden once re bedded, which I was planning on doing.
I've decided to go back to a chassis on this rifle so selling it at a loss since it's in rough condition. Could easily be finished by someone handier than I, or someone willing to send it to a professional.
Surgeon DBM is available from them directly if you call. I have one set to be shipped this week.
Last photo shows my BA installed.
PayPal or Venmo only.
Shipping to CONUS only.
Surgeon DBM inlet
2 cups left side
One sling stud
So this was originally inletted R700SA, rem varmint barrel channel, surgeon DBM that I opened up to accept an M40.
The recoil lug area was for a factory 700. I very crudely opened it up to accept a .350 lug. I never touched the rear area of the lug just the forward area.
It was bedded for a R700 action. I had to remove the bedding forward of the recoil lug in order to open it up. It's not pretty but I will all be hidden once re bedded, which I was planning on doing.
I've decided to go back to a chassis on this rifle so selling it at a loss since it's in rough condition. Could easily be finished by someone handier than I, or someone willing to send it to a professional.
Surgeon DBM is available from them directly if you call. I have one set to be shipped this week.
Last photo shows my BA installed.
PayPal or Venmo only.
Shipping to CONUS only.
Attachments
Last edited:
