How does one change LOP with the McMillan Spacer system?
TIA
TIA
- Thread starter fe1
- Start date
Re: McMillan LOP spacers
It's pretty simple. You loosen the two bolts in the butt of the stock and remove or add spacers to adjust the length of pull. Then re-tighten the bolts.
It's pretty simple. You loosen the two bolts in the butt of the stock and remove or add spacers to adjust the length of pull. Then re-tighten the bolts.
Re: McMillan LOP spacers
Whats the easiest way to find where the bolts are? And are they allen head and what size?
Whats the easiest way to find where the bolts are? And are they allen head and what size?
Re: McMillan LOP spacers
Add spacer:
Loosen the buttpad screws and drop the open slot on the bottom of a spacer onto the lower screw, while pivoting the spacer into place lining the slot on the top side of the spacer with the top screw. When in place, slide down and tighten screws.
Remove spacer: Loosen screws, reverse above, tighten screws.
Add spacer:
Loosen the buttpad screws and drop the open slot on the bottom of a spacer onto the lower screw, while pivoting the spacer into place lining the slot on the top side of the spacer with the top screw. When in place, slide down and tighten screws.
Remove spacer: Loosen screws, reverse above, tighten screws.
