Accessories MDT ACC Thumb Rest

[WolfThorn]

Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

 

[J_D]

I’ll try a right handed version. PM details.

 

[EmanP]

I got one this weekend from him at the ID hunter match and installed it last night. They look and feel great! I'll try it out this weekend at the RTC Karstetter match and see how well it holds up to 2 days of hiking in the hills with the double sided tape.

 

[WolfThorn]

I got one this weekend from him at the ID hunter match and installed it last night. They look and feel great! I'll try it out this weekend at the RTC Karstetter match and see how well it holds up to 2 days of hiking in the hills with the double sided tape.

View attachment 8127948View attachment 8127949View attachment 8127950View attachment 8127951View attachment 8127952

Hope you like it! Thanks for adding the pictures, I always forget to take them. Lol

 

[ultimatepredator]

PM Sent
Payment sent

 

[WolfThorn]

There has been some confusion on installation methods. Tapping your chassis is not required, its an alternative method. The provided double sided tape does its job very well.

 

[jeff.schulz12345]

Bump for a great product. I have one of the thumb shelves that we trimmed down and made work with a KRG W3 chassis, and it works great.

 

[Bubba_crx]

Love how mine feels, excited to test it out in match conditions.

 

[WolfThorn]

Bump

 

[Wabowman]

I have these on both my chassis. Love it!
I did tap my chassis.

 

[Loe]

The double sided tape holds up very well under any condition as long as you be sure to clean the surface areas and apply in a room temperature environment. Drilling and taping the chassis is very simple for those who have the means. 1/4” deep pilot hole then tap to 10/24 to accommodate the supplied screw. You can use the tape to line everything up then center punch the chassis through the hole in the thumbshelf.

 

[Billy.the.kid]

looks nice!

 

[RALA]

I'll take a right hand model. PM sent

 

[WolfThorn]

btt

 

[Schütze]

I installed 3 off these (just glued for now) on my acc’s, great product!
Holding up fine on one range trip so far, plan is if one comes loose I drill / tap all.

 

[J_D]

I installed one on my match rifle. Works great

 

[WolfThorn]

Good to hear they are working out!

 

[WolfThorn]

I installed 3 off these (just glued for now) on my acc’s, great product!
Holding up fine on one range trip so far, plan is if one comes loose I drill / tap all.

Did you use glue or the provided double sided tape?

 

[Altoonabcm157]

Overall happy with mine, I will be drilling and tapping the chassis since the tape seems to work fine but kinda gives alittle bit if you put pressure on it. Doesn’t move around but for lack of better description makes it flex under pressure. The screw should resolve that fully

 

[Schütze]

Did you use glue or the provided double sided tape?

The tape you supplied

 

[Mike Casselton]

Installed mine this morning with the supplied tape. I don't think it's going anywhere.

Me likey.

 

[Familydude]

PM’d for two lefties.

 

[Bubba_crx]

Shot a match with mine last weekend, and loved it. Feels much better. I used the supplied tape and it’s mounted on there solid.

 

[Rocklong]

Any chance you could make these for the xlr element 4.0?

 

[WolfThorn]

Any chance you could make these for the xlr element 4.0?

Absolutely! I will be in touch.

 

[Electric B]

Tag

 

[Altoonabcm157]

Just to update I took the time to drill and tap my chassis today. Although it’s probably not necessary it did make the shelf rock solid and I prefer it like this. Great little product.

 

[hancockbs]

PM sent.

 

[Ucsdryder]

Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

Can you make one for the xlr ?

 

[WolfThorn]

Can you make one for the xlr ?

Currently working on a version for the XLR. PM me and I can get back to you when I am done.

 

[chelton1988]

Pm info on a rh and payment

 

[Sil17sd]

PM’d for payment details

 

[DamonP]

I Would like to purchase a thumb rest extension

 

[wvlapua]

Pm inbound

 

[WolfThorn]

New batch printed! Left and Rights available.

To those who were looking for an XLR version, I am getting close.

 

[Familydude]

Used my lh version in a match this weekend. Worked great. Went with the tape. I’ll drill and tap if needed, but good so far!

 

[chelton1988]

Used my rh this weekend for first time I tore it off half way through the day. Will try taping again. It was in the pouring rain and very humid. Probably didn't get it clean enough. No negativity here I loved the fit and feel through the first 4-5 stages.

 

[lai345]

Pm

 

[WolfThorn]

Bump

 

[WolfThorn]

Bump

 

[srdowney]

Pm

 

[ohhowtheturntables]

10/10 product and easy to instal

 

[WolfThorn]

Fresh batch off the printer, plenty to go around!

 

[Rocklong]

Xlr element?

 

[WolfThorn]

Xlr element?

I need to model one up really bad! Have not had a chance to get my hands on a chassis to do so. Soon though as I have ordered one.

 

[rijndael]

I gotta say, this was a great add-on. I'm used to rougher 3D printed parts, but this one was very well done. I should have ordered 2.

 

[Eddie1990]

Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

Hi there

I really like your 3D print thumb rest.
I would like to order 3x left hand thumb rest unsure if you‘ll be able to ship to Australia

 

[IamAxel]

Pm

 

[John_S]

New to the forum and would love to buy a right handed thumb rest.

 

[64E]

I’ll take one please. Right handed version.