Rifle Scopes Micro T-1 on my .45-70 Guide Gun
- Thread starter MK14 SEI
- Start date
Re: Micro T-1 on my .45-70 Guide Gun
Very awesome!
One question - does it co-witness with the iron sights? If not, do you think it is possible with a different sight combination?
Very awesome!
One question - does it co-witness with the iron sights? If not, do you think it is possible with a different sight combination?
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: glock24</div><div class="ubbcode-body">Very awesome!
One question - does it co-witness with the iron sights? If not, do you think it is possible with a different sight combination?
</div></div>
Thanks!
No co-witness, but it does look like longer screws and custom
shims could raise the DRC sights enough for a 1/3 co-witness.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: glock24</div><div class="ubbcode-body">Very awesome!
One question - does it co-witness with the iron sights? If not, do you think it is possible with a different sight combination?
</div></div>
Thanks!
No co-witness, but it does look like longer screws and custom
shims could raise the DRC sights enough for a 1/3 co-witness.
Re: Micro T-1 on my .45-70 Guide Gun
Hey, you're like a regular cowboy
.
Just bustin' your chops, it's probably a pretty handy rifle.
Hey, you're like a regular cowboy
Just bustin' your chops, it's probably a pretty handy rifle.
Re: Micro T-1 on my .45-70 Guide Gun
I like it. Really like that base too. Where did you find that?
I like it. Really like that base too. Where did you find that?
Re: Micro T-1 on my .45-70 Guide Gun
I wanted to try the same thing on my Marlin but the forward rail I have is a Weaver and will not accept the T-1.
What T-1 mount are you using?
The LaRue "short" T-1 Mount (P/N LT661) might add just enough height to get you co-witnessed.
I would be very interested in a range report before I go through the hassle of swapping out my rail.
I wanted to try the same thing on my Marlin but the forward rail I have is a Weaver and will not accept the T-1.
What T-1 mount are you using?
The LaRue "short" T-1 Mount (P/N LT661) might add just enough height to get you co-witnessed.
I would be very interested in a range report before I go through the hassle of swapping out my rail.
Re: Micro T-1 on my .45-70 Guide Gun
Times, they are a changing... T-1 is lighter but only 1X
I use the ghost ring sights for back up
Times, they are a changing... T-1 is lighter but only 1X
I use the ghost ring sights for back up
Re: Micro T-1 on my .45-70 Guide Gun
That would be a sweet brush gun ....... I can hear the pigs squealing now ....
That would be a sweet brush gun ....... I can hear the pigs squealing now ....
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tigerbikes</div><div class="ubbcode-body">I wanted to try the same thing on my Marlin but the forward rail I have is a Weaver and will not accept the T-1.
What T-1 mount are you using?
The LaRue "short" T-1 Mount (P/N LT661) might add just enough height to get you co-witnessed.
I would be very interested in a range report before I go through the hassle of swapping out my rail. </div></div>
which one is that Tigerbikes ? I like the barrel/sight combo.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tigerbikes</div><div class="ubbcode-body">I wanted to try the same thing on my Marlin but the forward rail I have is a Weaver and will not accept the T-1.
What T-1 mount are you using?
The LaRue "short" T-1 Mount (P/N LT661) might add just enough height to get you co-witnessed.
I would be very interested in a range report before I go through the hassle of swapping out my rail. </div></div>
which one is that Tigerbikes ? I like the barrel/sight combo.
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">Have you shot it yet? How's it hold up to that recoil? </div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ghogs Nightmare</div><div class="ubbcode-body">Hows the combo perform?...Accuracy </div></div>
I am recovering from surgeries to my shoulder and arm and I have not fired this rifle yet.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">Have you shot it yet? How's it hold up to that recoil? </div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ghogs Nightmare</div><div class="ubbcode-body">Hows the combo perform?...Accuracy </div></div>
I am recovering from surgeries to my shoulder and arm and I have not fired this rifle yet.
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ninja</div><div class="ubbcode-body">
Times, they are a changing... T-1 is lighter but only 1X
I use the ghost ring sights for back up
</div></div>
I had it set-up with a Leupold Scout scope, but prefer the Aimpoint on the lever gun because I won't be targeting anything beyond 150 yards or so.
I moved the Scout scope over to my FrankenScoutMK14 because I will be reaching beyond 200 yards with it.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ninja</div><div class="ubbcode-body">
Times, they are a changing... T-1 is lighter but only 1X
I use the ghost ring sights for back up
</div></div>
I had it set-up with a Leupold Scout scope, but prefer the Aimpoint on the lever gun because I won't be targeting anything beyond 150 yards or so.
I moved the Scout scope over to my FrankenScoutMK14 because I will be reaching beyond 200 yards with it.
Re: Micro T-1 on my .45-70 Guide Gun
here is my set up
ruger no1 in 4570
scope burris 2-7x32 with ballistic plex
base modified by my son (machinist)
[img:center]
[/img]
here is my set up
ruger no1 in 4570
scope burris 2-7x32 with ballistic plex
base modified by my son (machinist)
[img:center]
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Impact</div><div class="ubbcode-body">which one is that Tigerbikes ? I like the barrel/sight combo.</div></div>
It is a Wild West Guns customized take down Marlin Guide Gun in .457 WW Magnum (it also shoots 45-70).
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Impact</div><div class="ubbcode-body">which one is that Tigerbikes ? I like the barrel/sight combo.</div></div>
It is a Wild West Guns customized take down Marlin Guide Gun in .457 WW Magnum (it also shoots 45-70).
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tigerbikes</div><div class="ubbcode-body">
It is a Wild West Guns customized take down Marlin Guide Gun in .457 WW Magnum (it also shoots 45-70).
</div></div>
WOW now that is cool!! I don't know anything really about lever guns but seeing that one SERIOUSLY makes me want one!! Thanks for sharing!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tigerbikes</div><div class="ubbcode-body">
It is a Wild West Guns customized take down Marlin Guide Gun in .457 WW Magnum (it also shoots 45-70).
</div></div>
WOW now that is cool!! I don't know anything really about lever guns but seeing that one SERIOUSLY makes me want one!! Thanks for sharing!!
Re: Micro T-1 on my .45-70 Guide Gun
What a great application for the T1. I replaced a CQT on my AR with one and my longer range groups improved. Such a totally different concept, I love having the field of view around the optic, it's almost like it just appears and with a dot big enough to see easily but not too big to obscure much of the target. I have bought more since.
On the downside, I will admit to hating the bikini covers. I needed a riser for AR so I got the GGG mount that allows for Butler Creeks. I'm sure that would ruin you low profile, I use that way on an AK.
JB
What a great application for the T1. I replaced a CQT on my AR with one and my longer range groups improved. Such a totally different concept, I love having the field of view around the optic, it's almost like it just appears and with a dot big enough to see easily but not too big to obscure much of the target. I have bought more since.
On the downside, I will admit to hating the bikini covers. I needed a riser for AR so I got the GGG mount that allows for Butler Creeks. I'm sure that would ruin you low profile, I use that way on an AK.
JB
Re: Micro T-1 on my .45-70 Guide Gun
JEB405... agreed, the bikinis suck.
I have a scope coat on my T-1, which should work for H2O MAN's application.
<span style="text-decoration: line-through">What Butler Creeks fit the T-1?</span>
And I figured this out...
GG&G Aimpoint T-1 Quick Detach MountWith Integral Flip Up Lens Covers
Neat-O.
JEB405... agreed, the bikinis suck.
I have a scope coat on my T-1, which should work for H2O MAN's application.
<span style="text-decoration: line-through">What Butler Creeks fit the T-1?</span>
And I figured this out...
GG&G Aimpoint T-1 Quick Detach MountWith Integral Flip Up Lens Covers
Neat-O.
Re: Micro T-1 on my .45-70 Guide Gun
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tigerbikes</div><div class="ubbcode-body">
I have a scope coat on my T-1, which should work for H2O MAN's application.
</div></div>
<span style="text-decoration: line-through">Who sells Scoapcoats for the Micro? </span>
Never mind, I found them... thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tigerbikes</div><div class="ubbcode-body">
I have a scope coat on my T-1, which should work for H2O MAN's application.
</div></div>
<span style="text-decoration: line-through">Who sells Scoapcoats for the Micro? </span>
Never mind, I found them... thanks
