Micrometer Adjuster for a Wilson seating die

[kyreloader]

I use an arbor press with a Wilson seating die for my bullet seating. I find adjusting the seating depth quite tedious without a micrometer adjuster for the top seating stem.

Does anyone know of a company that make a micrometer adjuster for the Wilson seating dies used in arbor presses?

Thanks in advance.

 

[treebasher]

Re: Micrometer Adjuster for a Wilson seating die

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kyreloader</div><div class="ubbcode-body">I use an arbor press with a Wilson seating die for my bullet seating. I find adjusting the seating depth quite tedious without a micrometer adjuster for the top seating stem.

Does anyone know of a company that make a micrometer adjuster for the Wilson seating dies used in arbor presses?

Thanks in advance.</div></div>

Here you go:

http://www.sinclairintl.com/.aspx/pid=36021/Product/Sinclair_Wilson_Micrometer_Seater_Top

Sinclair/Wilson Micrometer Seater Top

* Mfr:SINCLAIR INTERNATIONAL
* Price:$39.95

The Sinclair Micrometer Top allows the handloader to convert existing Wilson seaters to micrometer seaters. The top is constructed of stainless steel and is graduated in increments of .001 inch. To use, remove the existing seating stem from your Wilson Seater cap, and install in the Sinclair Micrometer Top. Now you are ready to make quick and easy changes to your cartridge's overall length. The top utilizes your existing seater stem or you can purchase an additional stem. Stem is not included.

 

[kyreloader]

Re: Micrometer Adjuster for a Wilson seating die

Thanks, I got one ordered up.