Add SHI. Thanks, but no trades needed.
Remington 700 SA Stocks. One black and one green. Both short action (308, 223, etc). No hardware or screws. $40 each
Remington Trigger - $25
H&R Model 700 22Mag Magazine. Not new but very hard to find H&R 22 Magnum magazine. Mag spring is strong. $125
Gas Blocks - PRI .936” Gas Block (New), SLR SA& -SM, PRI part number – 05-936-01, This a fixed gas block. $55 mailed to lower 48 in padded envelope.
https://www.precisionreflex.com/Detail.aspx?PROD=186814&CAT=10199
Lucas Bore guide – 7MM Mag $30 shipped
Nightforce Windage Turrent, if you have one that has some road rash you need a replacement – 1.069”OD, 1.013”ID, 0.704” Tall (dimensions are +/- - $30
New Gen 1 10 round Armalite AR10 mag, this is a factory mag marked on the bottom. $35
Seekins Barrel Nut, new – Don’t know what rail this fits. Has the screws with it. $25
Beretta 70-S, original, very good, off of a 70S .22, - $35
New in Box Scepter MFC, Tan, 1 new in the original boxes Scepter MFC. Both are tan. Never had anything in them. $150 each + SHI. These weigh 8 pounds each and the box measures 20x14x7”. This is the original box measurements. If you want it in another box, that will weigh more and be larger.
SAKO TRG Picatinny Rail LOW PROFILE, I know this fit a TRG22, not sure about a 42. This was mounted on a TRG22 I just bought and I want to go a different direction. Screws and pins included. Like new. $155
http://www.berettausa.com/en-us/sako-trg-picatinny-rail-low-profile/strlpp/
Warne 1" QD Rings, NEW, 1" - $50 ea (1 high, 1 med)
S&W Mdl 39 9mm Mag - $35
Kimber 1911 Sights - $25
Remington 700 SA Stocks. One black and one green. Both short action (308, 223, etc). No hardware or screws. $40 each
Remington Trigger - $25
H&R Model 700 22Mag Magazine. Not new but very hard to find H&R 22 Magnum magazine. Mag spring is strong. $125
Gas Blocks - PRI .936” Gas Block (New), SLR SA& -SM, PRI part number – 05-936-01, This a fixed gas block. $55 mailed to lower 48 in padded envelope.
https://www.precisionreflex.com/Detail.aspx?PROD=186814&CAT=10199
Lucas Bore guide – 7MM Mag $30 shipped
Nightforce Windage Turrent, if you have one that has some road rash you need a replacement – 1.069”OD, 1.013”ID, 0.704” Tall (dimensions are +/- - $30
New Gen 1 10 round Armalite AR10 mag, this is a factory mag marked on the bottom. $35
Seekins Barrel Nut, new – Don’t know what rail this fits. Has the screws with it. $25
Beretta 70-S, original, very good, off of a 70S .22, - $35
New in Box Scepter MFC, Tan, 1 new in the original boxes Scepter MFC. Both are tan. Never had anything in them. $150 each + SHI. These weigh 8 pounds each and the box measures 20x14x7”. This is the original box measurements. If you want it in another box, that will weigh more and be larger.
SAKO TRG Picatinny Rail LOW PROFILE, I know this fit a TRG22, not sure about a 42. This was mounted on a TRG22 I just bought and I want to go a different direction. Screws and pins included. Like new. $155
http://www.berettausa.com/en-us/sako-trg-picatinny-rail-low-profile/strlpp/
Warne 1" QD Rings, NEW, 1" - $50 ea (1 high, 1 med)
S&W Mdl 39 9mm Mag - $35
Kimber 1911 Sights - $25
