Muzzle brake for a straight 1.250 barrel?

[thefitter]

Looking for a brake that will blend with a straight barrel 1.250. Was going with a Fat Bastard but it's 1.125.

Thanks

 

[Sonic Crack]

Badger FTE, The clamp section of the brake is 1.2-1.3, Ill have to check to be sure

 

[mcfred]

Holland makes a 1.25OD brake: http://www.hollandguns.com/mbrakesC.shtml

 

[RyanScott]

Straight? Have it made out of the part of the barrel that is cut off. Chop a section, thread both ends, open the bore and cut ports...

 

[Edds]

Looking for a brake that will blend with a straight barrel 1.250. Was going with a Fat Bastard but it's 1.125.

Thanks

Get Chad Dixon to drill the end of your barrel.

 

[thefitter]

Get Chad Dixon to drill the end of your barrel.

How well does drilling work compared to ports?

thanks

 

[Edds]

I don't know the answer to your question but drill was probably a poor word choice. He might have the ability to make different shaped holes. Then maybe they could be called ports.

 

[JB02]

ROSS SCHULER, [email protected], can provide you a 1.250" diameter brake. Email him for details.

 

[RugerSlinger]

ROSS SCHULER, [email protected], can provide you a 1.250" diameter brake. Email him for details.

This guy makes one of the best brakes for the money. Order today and you will have it in days.

 

[Rhys]

I think Harrels precision makes one that would work for you. They work well, and the cost is pretty low.

 

[seanh]

Simply drilling ports doesn't work well however, C. Dixon doesn't just drill holes willie nillie. I'd have no problem sending my rifle to him and having him machine ports into the barrel.

 

[jwp6114]

Vais will custom make u one

 

[bottom_gun]

This guy makes one of the best brakes for the money. Order today and you will have it in days.

Concur with posts above. Had one machined by Ross Schuler at 1.25, turned out great and didn't set me back too much.