Looking to get a good muzzle break for my 28 nosler which is outfitted with a proof sendero Barrel, anyone have any suggestions of a muzzle break that has a similar OD as the proof sendero that blends well with the barrel?
Gunsmithing Muzzle Break For Proof Sendero
- Thread starter Atlas11B
- Start date
Our 3 port JetBlast brake is just slightly larger at 1" OD, about 0.050 per side and it is self timing. Very effective and only 3oz
The 4 port Shockwave is more designed for something the size of the 28N capacity but it's a substantially larger brake at 1-1/8" OD.
Neither is setup to blend into the barrel but the nice thing about using the JB here is that it would still look nice and you can move it from barrel to barrel without any additional cost, especially since the 28N lives for less than 1000rd...
http://patriotvalleyarms.com/jet-blast-muzzle-brake/
http://patriotvalleyarms.com/shockwave-muzzle-brake/
The 4 port Shockwave is more designed for something the size of the 28N capacity but it's a substantially larger brake at 1-1/8" OD.
Neither is setup to blend into the barrel but the nice thing about using the JB here is that it would still look nice and you can move it from barrel to barrel without any additional cost, especially since the 28N lives for less than 1000rd...
http://patriotvalleyarms.com/jet-blast-muzzle-brake/
http://patriotvalleyarms.com/shockwave-muzzle-brake/
Josh would it be possible to get a Jet Blast and a Rocket Scientist without the locking collar?
I’ve got a 6.5 Creedmoor build that a Jet Blast would be perfect for, and a 338-375 build that could benefit from the reduced blast signature a Rocket Scientist provides.
Both builds need to have the brake timed and blended however.
I would prefer to support your business endeavors if possible!
If this isn’t possible, probably go with a little bastard gen 1 on the creed, and a vias of some sort on the 338?
I’ve got a 6.5 Creedmoor build that a Jet Blast would be perfect for, and a 338-375 build that could benefit from the reduced blast signature a Rocket Scientist provides.
Both builds need to have the brake timed and blended however.
I would prefer to support your business endeavors if possible!
If this isn’t possible, probably go with a little bastard gen 1 on the creed, and a vias of some sort on the 338?
I ordered the shockwave for my 7mm and I drew out the barrel contour and muzzle break size on some grid paper.... kinda scared but I have no doubt it will be effective. I'll just have to remind myself "if it looks stupid and it works, then it's not stupid."
.700" barrel OD to 1.125" brake OD
.700" barrel OD to 1.125" brake OD
