My 280 AI groups

[acks280ack]

I am tying some different seating depths with my berger 168 vld's
These are all at 200yds
any ideas or sugestions to pull the fliers in?
Thank
Nick
I am going to try the a-max's well
This is what i'm working with...

 

[JRWALLSIII]

Re: My 280 AI groups

Try just touching the lands. It works best in my 280 AI with 180s. I would go to bergers website and follow there load development guide. It is usually all about seating depth. But I found the best groups with RL22. Imr 7828 didnt work to my expectations. You should be able to find a 1/2 moa load for sure!

 

[hgr2]

Re: My 280 AI groups

Seating depth is a real deal with VLDs. I bet that thing will let the air out of just about anything just the way it is.

 

[acks280ack]

Re: My 280 AI groups

Ya, I will try the 180's too. my barrel is 1-9 twist will it work with those 180's

 

[JRWALLSIII]

Re: My 280 AI groups

1/9 will work great. I run 56.5 grains RL22. cci benchrest primer, Nosler case. Shoots really good all the way to 1k

 

[acks280ack]

Re: My 280 AI groups

What kind of velocity do you get with the RL22