• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

My 300 WIN MAG (Range Report Added!!!!!!)

A

andy52887

Sergeant
Banned !
Minuteman
Jan 6, 2012
141
23
37
Shreveport,LA
#1
Rem. 700 action trued
Contoured the barrel myself (Pretty much a Sendero contour)
Seekins DBM
Seekins Rings and bases
Timney Trigger
HS Precision Stock hydro dipped in Carbon Fiber
Vortex Viper PST FFP 4-16x50mm

I did all the barrel work in 2007 while attending Pennsylvania Gunsmith School.I shot it a little with a Laminated wood stock that I built but pretty much have been changing everything over to what you see in the pictures.
IMG_2324.jpg

IMG_2327.jpg

IMG_2331.jpg
 
#8
Re: My 300 WIN MAG is Finished Finally

Thanks guys....I made it to the local 1000 yard range today and will I guess you can say I am ruined.There were some guys there that asked if I wanted to shoot there rifle and of course I jumped right in and on my 3 rd shot got to ring some metal.Although it wasn't my gun it was a cool feeling and now I have something to look forward too when I get mine dialed in.One of the shooters was William Roscoe of LA Precision rifles and they were all willing to answer any questions I had and hope to get to spend some time with those guys they are the real deal.
 
#9
Re: My 300 WIN MAG is Finished Finally

Great to see you have that range nearby, Andy. You've got just the rifle for that range. Have a great time dialing her in.

Take lots of pics with your first range report!
 
#10
Re: My 300 WIN MAG is Finished Finally

I got to the range this afternoon and got to do some load tesing.(100 yards) 3 shot groups

Hornady 208 gr. A-MAX .015 jump
RL-22
Remington brass
Federal GM215M Primer

This is my second time behind the gun and I still have alot of learning to do but let me know what you think.
2012-05-06_19-15-40_57.jpg
 
#12
Re: My 300 WIN MAG is Finished Finally

My next trip I will have some 5 round groups.Im still working on trigger control and tend to pull 2 out of 5 shots.LOL How long should I wait before each group is fired.I know alot depends on outside temp,wind,etc. but a roundabout number for waiting.
 
#14
Re: My 300 WIN MAG is Finished Finally

Well I have always been a shotgun shooter and just starting to get into shooting rifles.Went and joined a local gun club yesterday that has 100-1000 yard range.When I built this gun the main purpose was I wanted to be confident out to 500 yards but after shooting 1000 yards with another members gun and ringing steel I think I may be trying to move more towards that eventually.But this rifle for now will double as my box stand deer rifle.That was the main purpose to get good at further distances to make good clean shots.
 
#15
Re: My 300 WIN MAG is Finished Finally

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andy Y.</div><div class="ubbcode-body">Well I have always been a shotgun shooter and just starting to get into shooting rifles.Went and joined a local gun club yesterday that has 100-1000 yard range.When I built this gun the main purpose was I wanted to be confident out to 500 yards but after shooting 1000 yards with another members gun and ringing steel I think I may be trying to move more towards that eventually.But this rifle for now will double as my box stand deer rifle.That was the main purpose to get good at further distances to make good clean shots. </div></div>

Ok. I would suggest trying your loads 500 yds to see what works best. Usually anything that groups well at 100 yds will group well at longer ranges too. But, as with anything, there are exceptions to that rule. For example, my 260 Rem loves 140 gr Sierra Match King's at 100 yards. If I do my part it's an easy 0.1 MOA load. It also likes 140 AMAX at 100 yds, just not as much - 0.2 MOA. But at 600 yards, the AMAX's group better (about 1.5 inches vs. 2.8 inches). Both loads use the same powder, same charge, same primers, and both are about 0.010" off the lands. So, it's definitely worth while verifying at longer ranges. If you intend to shoot at game at 500 yards, I would be certain that you can place 10 rounds inside a 10" circle at that range without fail from field positions.

All the best
 
#16
Re: My 300 WIN MAG is Finished Finally

Did you do skip 65 grains? Also, were you aiming at the center of each orange target? I ask because on your 64.5 load you are about 1 inch or more to the right and the 65.5 load is about 2" left. Are you adjusting scope?

When I load develop I start at .5 grains then move to .3 grains. Also, within a couple grains my shots will all hit in the same general area but some groups will be smaller than others.
 
#17
Re: My 300 WIN MAG is Finished Finally

Yes I did skip 65.My reloading manual had the min. load at 62.5 so I just went up 1 grain and stopped at the max load.The only help I have had is reading SH so I'm just starting to get my feet wet in this long range shooting.If you can help I will be more then glad to listen what you guys have to say and really appreciate what information I have got so far.And yes you are correct I was adjusting the scope and the reason for that was because I was trying to keep all the loads on the same paper and not over run another group.It probably was a mistake on my part and shouldn't have messed with anything and just put up another target.
 
#18
Re: My 300 WIN MAG is Finished Finally

That would be nice if 64.5 and 65.5 shot to the same point. If so then 65 would be great. You could sling a powder charge of 65 without being super accurate. That would save some time on loading. Nice rifle, love the 208.
 
#19
Re: My 300 WIN MAG is Finished Finally

Im going to get some more worked up this week and try 64.5 and 65.5 without messing with the scope.LOL I have another box loaded but I used H4831SC that I have to try also.Maybe I'll be able to find a good load out of them.So once I get the powder charge I like do I then start to play the distance to the lands?
 
#20
Re: My 300 WIN MAG is Finished Finally

If 64.5 and 65.5 shoot to the same point then I would just use 65 gr. Then load .010 long and .010 shorter and see if there is a difference. If no difference then split the middle. This will give you a load that is not picky and you wont have to spend as much time reloading. Have you tried H1000? It is my favorite for the 300 win mag. I like the temp stability of hogdon powder.
 
#21
Re: My 300 WIN MAG is Finished Finally

I haven't got to try the H1000 yet.When I went to get some they were out.I looked in the new hornady book with the 208 amax and it wasnt listed so how do you figure min and max?
 
#26
Re: My 300 WIN MAG is Finished Finally

Yeah I saw some rings like mine saturday and they were oppisite of mine but when I asked they didnt really have an answer.What is the reason for the 6 bolt on the front?
 
#27
Re: My 300 WIN MAG is Finished Finally

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Andy Y.</div><div class="ubbcode-body">Yeah I saw some rings like mine saturday and they were oppisite of mine but when I asked they didnt really have an answer.What is the reason for the 6 bolt on the front? </div></div>

That's how the USMC rings were made for their M40A3' and 5's.
Its just a traditional way. More ring on the scope, for less movement under recoil. Guess it doesnt matter its just what most people are used to seeing.
 
#28
Re: My 300 WIN MAG is Finished Finally

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jayman_10X</div><div class="ubbcode-body">If I do my part it's an easy 0.1 MOA load.</div></div>

You'd win 99% of matches shooting like that. Any targets to post?
 
You must log in or register to reply here.

Similar threads

Bowhntr4life
SOLD 2-Pure Precision Altitude SA Carbon Fiber Stocks with DBM and Mag
Replies
2
Views
166
Bowhntr4life
Bowhntr4life
cattleman99
Firearms Custom rifles for sale - 300 PRC, 22 ARC, 30-06
Replies
5
Views
822
cattleman99
cattleman99
brand692
Firearms WTT Nosler M48 Long Range Carbon Fiber 300 Win Mag w Leupold VX-7L 4.5-18X56 SF 34mm B&C
Replies
3
Views
205
brand692
brand692
S
SOLD WTS: Remington 700 300 win mag Rifle Build
Replies
20
Views
3K
STI_1911_Guy
S
M
SOLD 300 RUM Turnkey
Replies
8
Views
678
Moodilistic
M
Top Bottom
Back
Home
Forums
Merch
Alerts