my 3part playlist for the GEN2 annealeez! overview, how to make my "trap door" mod, & how i anneal!

[elfster1234]

my 3part playlist for the GEN2 annealeez is done! showing an overview of the annealer, how to make my elfster "trap door" mod, and how I anneal my brass using the GEN2 annealeez!

https://www.youtube.com/playlist?list=PLCyPEnjRX7eboyMG5aXLgO4cFzvDQznBj

 

[TexasTightwad]

I'm not understanding why you went to the trouble of making the "trap door". Wouldn't it be easier to just wait to load your brass?

 

[padom]

Did you put the Goss regulator on? You will find, if you dont use the regulator, you get your flame and speed set and on large batches of brass they will not anneal all the same because pressure drops in the tank. That's why a lot of us went to a Goss regulator and I got a 1gallon tank. Less than $6 to fill and lasts forever.

No more pressure drops as your Coleman tank gets used up like in the stock config. When you get your flame set where you want it for specific brass, you note in your records the PSI on the regulator. 6psi is what I use for my 6.5cm

I got this tank off Amazon but you can find them locally as well.

https://www.amazon.com/Worthington-...pID=41Ye1zcjPuL&preST=_SY300_QL70_&dpSrc=srch


Goss Regulator

https://www.amazon.com/gp/product/B00D2ZVTZK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


And I swapped the Pressure Gauge that comes on the Goss with this one because it gives you more granular PSI adjustment

https://www.amazon.com/gp/product/B0087UY60K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1