Gunsmithing My new barrel vise!
- Thread starter bm11
- Start date
Re: My new barrel vice!
Thats a pretty interesting design. Looks stout as hell and pretty easy to use with the single point tightening screw.
nice vice
DD
Thats a pretty interesting design. Looks stout as hell and pretty easy to use with the single point tightening screw.
nice vice
DD
Re: My new barrel vice!
similiar to a design they used to do up at Lassen College. It'll work well
similiar to a design they used to do up at Lassen College. It'll work well
Re: My new barrel vice!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYshooter338$</div><div class="ubbcode-body">Where did you get that from? </div></div>
Probably here.
http://www.snipershide.com/forum/ubbthre...383#Post2005383
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYshooter338$</div><div class="ubbcode-body">Where did you get that from? </div></div>
Probably here.
http://www.snipershide.com/forum/ubbthre...383#Post2005383
Re: My new barrel vice!
I had a 1937 91/30 Mosin Nagant receiver and action I got for $5.
I put Kroil in the thread junction at both ends of the barrel threads and waited an hour.
I cleaned the collet and barrel with tooth brush and alcohol.
I put powder sugar on the Aluminum collet to barrel junction.
I measured 540 foot pounds to get it to break loose.
I cleaned the 73 years worth of rust off the barrel and receiver threads and oiled them.
I then measured 200 foot pounds to get the barrel back on the mark.
What does it all mean?
With a good enough barrel vise, one does not have to make a stress relief cut into the barrel.
I had a 1937 91/30 Mosin Nagant receiver and action I got for $5.
I put Kroil in the thread junction at both ends of the barrel threads and waited an hour.
I cleaned the collet and barrel with tooth brush and alcohol.
I put powder sugar on the Aluminum collet to barrel junction.
I measured 540 foot pounds to get it to break loose.
I cleaned the 73 years worth of rust off the barrel and receiver threads and oiled them.
I then measured 200 foot pounds to get the barrel back on the mark.
What does it all mean?
With a good enough barrel vise, one does not have to make a stress relief cut into the barrel.
Re: My new barrel vice!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">I had a 1937 91/30 Mosin Nagant receiver and action I got for $5.
I put Kroil in the thread junction at both ends of the barrel threads and waited an hour.
I cleaned the collet and barrel with tooth brush and alcohol.
I put <span style="color: #FF0000">powdered sugar</span> on the Aluminum collet to barrel junction.
I measured 540 foot pounds to get it to break loose.
I cleaned the 73 years worth of rust off the barrel and receiver threads and oiled them.
I then measured 200 foot pounds to get the barrel back on the mark.
What does it all mean?
With a good enough barrel vise, one does not have to make a stress relief cut into the barrel. </div></div>
What does the powdered sugar do?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">I had a 1937 91/30 Mosin Nagant receiver and action I got for $5.
I put Kroil in the thread junction at both ends of the barrel threads and waited an hour.
I cleaned the collet and barrel with tooth brush and alcohol.
I put <span style="color: #FF0000">powdered sugar</span> on the Aluminum collet to barrel junction.
I measured 540 foot pounds to get it to break loose.
I cleaned the 73 years worth of rust off the barrel and receiver threads and oiled them.
I then measured 200 foot pounds to get the barrel back on the mark.
What does it all mean?
With a good enough barrel vise, one does not have to make a stress relief cut into the barrel. </div></div>
What does the powdered sugar do?
Re: My new barrel vice!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: B. Melick</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">I had a 1937 91/30 Mosin Nagant receiver and action I got for $5.
I put Kroil in the thread junction at both ends of the barrel threads and waited an hour.
I cleaned the collet and barrel with tooth brush and alcohol.
I put <span style="color: #FF0000">powdered sugar</span> on the Aluminum collet to barrel junction.
I measured 540 foot pounds to get it to break loose.
I cleaned the 73 years worth of rust off the barrel and receiver threads and oiled them.
I then measured 200 foot pounds to get the barrel back on the mark.
What does it all mean?
With a good enough barrel vise, one does not have to make a stress relief cut into the barrel. </div></div>
What does the powdered sugar do? </div></div>
I'm guessing he was using it like rosin to increase the friction.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: B. Melick</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">I had a 1937 91/30 Mosin Nagant receiver and action I got for $5.
I put Kroil in the thread junction at both ends of the barrel threads and waited an hour.
I cleaned the collet and barrel with tooth brush and alcohol.
I put <span style="color: #FF0000">powdered sugar</span> on the Aluminum collet to barrel junction.
I measured 540 foot pounds to get it to break loose.
I cleaned the 73 years worth of rust off the barrel and receiver threads and oiled them.
I then measured 200 foot pounds to get the barrel back on the mark.
What does it all mean?
With a good enough barrel vise, one does not have to make a stress relief cut into the barrel. </div></div>
What does the powdered sugar do? </div></div>
I'm guessing he was using it like rosin to increase the friction.
Re: My new barrel vice!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gundoktr</div><div class="ubbcode-body">Am I missing something here, all I see is a VISE, where is the dirty part, the vice?
Jim </div></div>Ah, I see the joke here!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gundoktr</div><div class="ubbcode-body">Am I missing something here, all I see is a VISE, where is the dirty part, the vice?
Jim </div></div>Ah, I see the joke here!
Re: My new barrel vice!
There can be a correlation between poor spelling and good mechanical reasoning. It can be carried on a single gene.
Those who would use a vise, are likely to spell it "vice".
There can be a correlation between poor spelling and good mechanical reasoning. It can be carried on a single gene.
Those who would use a vise, are likely to spell it "vice".
Re: My new barrel vice!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">There can be a correlation between poor spelling and good mechanical reasoning. It can be carried on a single gene.
Those who would use a vise, are likely to spell it "vice". </div></div>Interesting insight.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">There can be a correlation between poor spelling and good mechanical reasoning. It can be carried on a single gene.
Those who would use a vise, are likely to spell it "vice". </div></div>Interesting insight.
Re: My new barrel vice!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Old Doug in GA</div><div class="ubbcode-body">Great looking system Is it still in production? OLD DOUG </div></div>Yeah, Midway carries them.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Old Doug in GA</div><div class="ubbcode-body">Great looking system Is it still in production? OLD DOUG </div></div>Yeah, Midway carries them.
Re: My new barrel vise!
Thanks for the idea/pic. I have a new barrel for my stick and need a barrel vice. Will build one like this quick like.
Thanks for the idea/pic. I have a new barrel for my stick and need a barrel vice. Will build one like this quick like.
Re: My new barrel vice!
I have been cutting the collets from alternate ends.
I have been cutting tapers in the inside of the collets with the boring bar.
I have been cutting the collets from alternate ends.
I have been cutting tapers in the inside of the collets with the boring bar.
Similar threads
