I'm wondering what options there are for fitting a barrel to a .308 FN PBR action. CDNN sells them and a stock for pretty cheap and I was curious where I could find a barrel for it or perhaps use a Model 70 designed barrel. Thanks!
Gunsmithing Need barrel for PBR action
- Thread starter no_cigar
- Start date
Re: Need barrel for PBR action
my buddy has a custom ss fluted 8 twist 6.5creedmoor that would work it is off his fn spr. pm me if interested.
my buddy has a custom ss fluted 8 twist 6.5creedmoor that would work it is off his fn spr. pm me if interested.
Re: Need barrel for PBR action
any competent smith can fit a blank to this action. or you could use a model 70 fitted barrel, yes.
any competent smith can fit a blank to this action. or you could use a model 70 fitted barrel, yes.
Re: Need barrel for PBR action
Is it a PBR action with a push feed or an SPR action CRF. If the latter, you WILL NOT be able to screw on a fitted pre-chambered barrel without a little modification or ALOT of luck due to the idexing required to fit the claw extractor.
Also, an SPR barrel (crf) WILL NOT fit on a PBR action (push feed) unless it is the one PBR model that used a CRF action (IIRC its the XP.)
Is it a PBR action with a push feed or an SPR action CRF. If the latter, you WILL NOT be able to screw on a fitted pre-chambered barrel without a little modification or ALOT of luck due to the idexing required to fit the claw extractor.
Also, an SPR barrel (crf) WILL NOT fit on a PBR action (push feed) unless it is the one PBR model that used a CRF action (IIRC its the XP.)
Similar threads
