Gunsmithing Need help identifying this part

[RCKJAX]

I purchased some reloading equipment from the wife of a deceased Navy vet. She had boxes and boxes of amazing stuff that he had from his years of service. In the reloading supplies I came across this (see pic). It appears to be part of a trigger assembly but I don't have the experience to recognize the application or model that it belongs to. She may still own the firearm that it belongs to. I was hoping to figure it out before I went back and asked her if she needed this back. I'm not sure if she would be able to identify it either .
Thanks in advance
Rob

 

[RCKJAX]

Here is another picture of it disassembled....

 

[wpeach1912]

That is a reloading press mounted primer seater

 

[powdahound76]

thats a primer seater for a press. Specifically a Lee press I believe.
Will work in the slot of the ram, usually on the R side of the ram.

 

[Mike Casselton]

It's a confabulator. It mounts on the underside of the Ramposium right across from the knurled portion of the doomafotchi.
It prevents tittalation within the shuttle assembly while the ramshorn is in the upper Slobbovion guide rod.



OR, @powdahound76 is correct.

 

[RCKJAX]

It's a confabulator. It mounts on the underside of the Ramposium right across from the knurled portion of the doomafotchi.
It prevents tittalation within the shuttle assembly while the ramshorn is in the upper Slobbovion guide rod.



OR, @powdahound76 is correct.

Ah ha! You are obviously a descendant of Wile E Coyote.... Super Genius!!!! Using your nuclear whooptidoo to power your whizbang right out of the ACME catalogue! Haha good times!

 

[RCKJAX]

thats a primer seater for a press. Specifically a Lee press I believe.
Will work in the slot of the ram, usually on the R side of the ram.

Awesome thank you!

 

[sirhrmechanic]

Is this still available?

 

[RCKJAX]

Shut up Richard your brain has the shell on it!

 

[Mike Casselton]

Ah ha! You are obviously a descendant of Wile E Coyote.... Super Genius!!!! Using your nuclear whooptidoo to power your whizbang right out of the ACME catalogue! Haha good times!

He is my second favorite character.
Never could stand the Road Runner.

Foghorn Leghorn is #1.

 

[Mooseknuckles]

thats a primer seater for a press. Specifically a Lee press I believe.
Will work in the slot of the ram, usually on the R side of the ram.

Close, but it’s for a Hornady press.

Hornady 007 Single Stage Press Auto Primer Feeder Arm

These are factory replacement parts for the Hornady 007 Single Stage Reloading Press. Notes: Includes feeder arm and large and small primer feed cups

www.midwayusa.com

 

[Longrangeprecision762]

Is this still available?

I have one of these as well if anyone is in need. F.I.Y mine is left handed though

 

[powdahound76]

@Mooseknuckles - go bust a wrench or something…
Then I had to go grab mine outta my Lee (depriming press) and look. Just a tad different. Mine is so caked with nasty crap I should clean that press up a bit….

 

[powerspc]

That is a reloading press mounted primer seater

Correct; it is off a Hornady Lock-N-Load Classic Press.