My problem is that the small piece of flat stock between the stock and the aluminum bedding block metal , it looks to be about 1/1/2 " has two holes threw it .one side has two forty fives cut into it .
can some one please advise me which end the 45 should be facing to properly reinstall it. And if their is a TRG 42 armorers manual in english out their thanks in advance
V/R William
can some one please advise me which end the 45 should be facing to properly reinstall it. And if their is a TRG 42 armorers manual in english out their thanks in advance
V/R William
Last edited:
