Rifle Scopes need help with with a ring ID.

[razerok1]

i picked theese up couple hours ago and can't ID them. They are steel as are the 1" inserts.

sorry for the crappy pics.

 

[OpticsPlanet]

Re: need help with with a ring ID.

Pretty sure they are leatherwood max-tac rings. They come standard in 30mm with those 1'' inserts.

Trevor B.

 

[hyena74]

Re: need help with with a ring ID.

i think thats what they are too. my first set of heavy duty rings were the leatherwood max 50's. they were pure shit and had holes stripped out and others with very poorly cut threads from the factory.

i send them right back to swfa.

 

[razerok1]

Re: need help with with a ring ID.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Optics Planet</div><div class="ubbcode-body">Pretty sure they are leatherwood max-tac rings. They come standard in 30mm with those 1'' inserts.

Trevor B. </div></div>
i just checked those out they aren't it look at this picture

http://www.hi-luxoptics.com/images/images/cat-max_tac.gif

The 1" inserts aren't flush and the bolt/recoil lug is square and the measurements are not the same

 

[razerok1]

Re: need help with with a ring ID.

They measure 228" (measured from base of ring to bottom of scope tube)

 

[BCP]

Re: need help with with a ring ID.

The color of the metal, the machining and the clamp remind me of my IOR rings. I don't know if they made them with 1" inserts though and all mine have had star wrenches not allen wrenches.

edit: just looked at my IOR's and they aren't the same...