Gunsmithing need helppppppp
- Thread starter JoeAdams
- Start date
Re: need helppppppp
Yes, everything is the same except the Stevens doesn't come with an accu-trigger. Just measure the action holes and order the appropriated stock.
Yes, everything is the same except the Stevens doesn't come with an accu-trigger. Just measure the action holes and order the appropriated stock.
Re: need helppppppp
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: billyburl2</div><div class="ubbcode-body">Yes, everything is the same except the Stevens doesn't come with an accu-trigger. Just measure the action holes and order the appropriated stock.</div></div>
ok so that means I can put a detachable bottom metal on it to that is made for a savage right?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: billyburl2</div><div class="ubbcode-body">Yes, everything is the same except the Stevens doesn't come with an accu-trigger. Just measure the action holes and order the appropriated stock.</div></div>
ok so that means I can put a detachable bottom metal on it to that is made for a savage right?
Re: need helppppppp
Yes. It is dependant on the bolt spacing on the bottom of the receiver. If it is 4.2" it is a stagger-feed, if 4.41" its a center-feed.
Yes. It is dependant on the bolt spacing on the bottom of the receiver. If it is 4.2" it is a stagger-feed, if 4.41" its a center-feed.
Re: need helppppppp
While the above advice is helpful, it still makes absolute sense to discuss your firearm with the folks who make the bottom metal. Having the firearm's serial number and action bolt spacing onhand prior to that discussion will ease the conversation.
While the above advice is helpful, it still makes absolute sense to discuss your firearm with the folks who make the bottom metal. Having the firearm's serial number and action bolt spacing onhand prior to that discussion will ease the conversation.
