JoeAdams Sergeant Full Member Minuteman Nov 29, 2011 124 0 52 Hibbing MN Dec 23, 2011 #1 Dec 23, 2011 #1 I need some different load data to test out. Just post what loads you have came out and I'll try them out.
I need some different load data to test out. Just post what loads you have came out and I'll try them out.
M mscott Gunny Sergeant Full Member Minuteman Oct 10, 2007 1,417 11 Central Ohio Dec 23, 2011 #2 Dec 23, 2011 #2 Re: Need load data for 7mm rem mag There is a reloading section to this forum. If you go down a little and click on it. Then click on the Reloding Depot at the top of that. Lots of good info.
Re: Need load data for 7mm rem mag There is a reloading section to this forum. If you go down a little and click on it. Then click on the Reloding Depot at the top of that. Lots of good info.
*greenhorn* Full Member Full Member Minuteman Aug 24, 2011 1,443 0 46 Daytona, Fl Dec 23, 2011 #3 Dec 23, 2011 #3 Re: Need load data for 7mm rem mag what powder you wanting to run?
Wylie Custom Sergeant of the Hide Full Member Minuteman Jan 27, 2011 430 1 Dec 23, 2011 #4 Dec 23, 2011 #4 Re: Need load data for 7mm rem mag When I had a 7mm I ran 67 grains of rl22 behind a 168vld. It was 3000 fps in a 24 inch barrel.
Re: Need load data for 7mm rem mag When I had a 7mm I ran 67 grains of rl22 behind a 168vld. It was 3000 fps in a 24 inch barrel.
JoeAdams Sergeant Full Member Minuteman Nov 29, 2011 124 0 52 Hibbing MN Dec 23, 2011 #5 Dec 23, 2011 #5 Re: Need load data for 7mm rem mag Thanks man I tryed out 2 rounds of it and they were pretty tight together
Re: Need load data for 7mm rem mag Thanks man I tryed out 2 rounds of it and they were pretty tight together
Sendero_Man OMWP... the way I roll Supporter Full Member Minuteman Mar 29, 2007 4,344 644 Buffalo, Wyoming montanagunslings.com Dec 23, 2011 #6 Dec 23, 2011 #6 Re: Need load data for 7mm rem mag lots of good info here for ya... http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=349882&gonew=1#UNREAD
Re: Need load data for 7mm rem mag lots of good info here for ya... http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=349882&gonew=1#UNREAD