Rifle Scopes need to learn about 1913-weaver rails fast

[416barrett]

i need information on rail before the next few days my gun will accept a #19 weaver 2 piece to to mount a red dot i need a one piece . from what ive seen their is a 7/8 1913 rail and a 3/8 1913 rail so i figured mine takes the 3/8's rail. the holes are very close together heres a picture or they all specific to guns if so im F-ed becuase i think mine takes a odd size well hole spaced mount .

 

[dimar1492]

Re: need to learn about 1913-weaver rails fast

what kind of action do you want to put it on?

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

break barrel single shot

 

[dimar1492]

Re: need to learn about 1913-weaver rails fast

okay,what make and model

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

h&r 10 ga new model that has chokes and is drilled and tapped

 

[dimar1492]

Re: need to learn about 1913-weaver rails fast

doubt there is a whole bunch of options in a 1913 picatinny rail for that gun

 

[SwatSgt]

Re: need to learn about 1913-weaver rails fast

Do you know the exact model number? There are several 10 ga models listed on their web site. A little more information would help a lot.

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

i can upload a picture of the top of the tapped holes . i plan on taking it to the big gun store we have friday and the guy their is pretty knowlegable for a behing the counter person.my neighbor is also stopping by the local gunsmith tomorrow and he said he's going to ask him and if he has somthing that will work he will buy me one

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

they only make the break barrel 10 ga waterfowl and tureky model same gun one just has a 24" barrel other has a 30" mine was the first year they started the chokes and drill tapping it has a 23" barrel .bead site is killing me past 20 yards

 

[lazy21]

Re: need to learn about 1913-weaver rails fast

send it to seekins and let him make you one

 

[SwatSgt]

Re: need to learn about 1913-weaver rails fast

What kind of scope are you trying to put on there?

Sorry read post again you said red dot. And you needed a one piece. I agree if someone will make you a custom rail I would go with that.

 

[ORD]

Re: need to learn about 1913-weaver rails fast

Without know what specific model...it is hard to tell which mount, if any, will work. Have you tried getting with H&R about it?

Again, without knowing more...this MIGHT work (and it might not):

http://www.midwayusa.com/viewProduct/?productNumber=338568

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

yeah i have two of thos #19 mounts but made my leupold when i went to their sight to find it they had it listed under 3/8 and the holes were close like mine so thats why i thought it was a or is a 3/8 1913 rail http://www.doropaintball.com/ab1038101equick/shopexd.asp?id=8845

 

[SwatSgt]

Re: need to learn about 1913-weaver rails fast

It is your gun and your decision but I would not go with something from a paintball/ airsoft store. Granted I play paint ball and I own a lot of expensive paintball stuff but I don't put any of it on a firearm. If may work and it may shear off and hit you in the face. I'm sure you know it already but that is a lot of recoil in that 10 ga. Sorry I couldn't be more help.

 

[ORD]

Re: need to learn about 1913-weaver rails fast

Oh...I see what you are trying to do now. Must have missed it in your earlier posts. My guess is that the only way you are going to get a solid, 1pc base for that rifle is to either modify an existing one or have one made from a rail blank. Check with your local smith tommorw when you see him and see what he can offer. If not locally, get with G. Seekins re: a custom job. If not there, then check with Murphy Precision and see what they cna do for you.

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

on a side note i have fired 15 rds or so though this gn since i got it 3 weeks ago its not that bad . it is loud though like a braked rifle i was told because the bigger bore more gas escapes but aslo has more complete powder burn .

if i just bought a long eye relief scope i would use the mounts i have which arent even for this gun .my brothers is taking welding and his college shop teacher is a machinist he build his own 50 bmg bolt action rifle from scratch so he could make a base of just weld one inbetween the two peice ones i have to make one long 1

 

[416barrett]

Re: need to learn about 1913-weaver rails fast

from what i see weaver measue theirs hole center to hole center mine is .50"

 

[cdmurphy]

Re: need to learn about 1913-weaver rails fast

If you can measure the hole spacings, I can make you a custom base without any trouble. Just give me a call at 800-553-8527 if you would like to discuss this further.

Cameron Murphy
Murphy Precision