Need to zero a .223 at 400-yds with a 100-yd range

[sasquatch98226]

So I picked up a Meopta ZD for 3-gun, and after reading some posts here and there was told to zero the first chevron at 400-yards, and then the the others will fall at 500, and 600. That makes the dot at about 250. Sounds great, but I do not have access to a 400-yard range.

Any tips, or scaled targets on how to zero at 400-yards with only a 100-yard range?

Thanks

 

[338RUM runner]

Re: Need to zero a .223 at 400-yds with a 100-yd range

What bullet and what vol also what is your center line of scope to bore.

 

[jjrgr21]

Re: Need to zero a .223 at 400-yds with a 100-yd range

try the vortex ballistics calc

 

[sasquatch98226]

Re: Need to zero a .223 at 400-yds with a 100-yd range

good question, I'll go measure the centerline to Bore. 55gr montanna golds, I'll have to look up the velocity in the garage.

 

[waveslayer]

Re: Need to zero a .223 at 400-yds with a 100-yd range

I would zero your rifle in at 25 yards, this should put you close dead on at 400 yards.