Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
The F1 is different than the SFP MLR as I have both. Not 100% sure of the reticle dimension but having looked at a 5" dot at 1000 yards with the F1 MLR reticle I would guess the main vertical and horizontal crosshairs are approx .2 MOA in width.
I pulled out the printed version of the book. I think the 2FP equates to .02705 mil for the 5.5x22x and .00378 mil for the 3.5-15x Both obviously at max power. In the print I have, NF subtensioned reticles (only in line thickness) in MOA for some reason. Neither is a even number.
From Rob's estimate at range for the 3.5x15 F1; .058 mil.
Orkan's PDF link put the line thickness at .07 mil. I think this applies or is intended for the F1. The headings were confusing.
The subtensions given in the data book page orkan posted up are for the FFP MLR reticle as they were taken from the data sheet provided by NF. The data sheet was made for my personal use and I just put "not to scale for the F1" because all I had was a picture of the SFP MLR reticle which is different. Sorry for any confusion the data book page may have caused, I've already made changes and have the revised page up on my website.