I got 550 to 600 once shot fgm brass. Question is will these perform as well as lapua. Weighed one lapua and one fgm and the fgm weighed 3 grains more. Will this effect poi, over pressure......? Thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Aimsmall55</div><div class="ubbcode-body"> Question is will these perform as well as lapua.</div></div>
Maybe with some prep work. Wouldn't be my first choice of brass. I prefer Winchester, only from the economical standpoint. If I could justify (be able to tell the difference) I would buy Lapua.
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body"> Will this effect poi, over pressure......? Thanks </div></div>
Not if you do some proper load development.
May not last as long as Lapua (should say "Probably"). I'd say you can get more than one load out of them. If the case volume is similar the load won't change much.
Good News. After too many years of reloading I decided to treat myself and bought 1000 rds of 168 FGMM. I thought I'd never shoot it up. Then someone invented F Class and before I knew it ....it was gone. The good news is that I have prepped it all and am now more than 1/2 way through the second firing.....neck sizing only. What a treat it is to neck size vs full size. Accuracy iwith 44.4 Varget seated same as FGMM gives better velocity and equal or better accuracy in my R-5. (1/2 MOA). I hope to get a 3rd and possible a 4th loading.....Load em up and shoot!!