opinions on the JP enterprises scope mounts

[uracowman]

I just purchased a set of 34mm JP enterprises scope mounts for a new sako trg 22 I purchased. I read some really good reviews on this product and took the plunge after some consulting with the guys at a local gun store. After I got home, I began to wonder if I would run into any trouble once I mount the scope.

I shouldn't have any problems should I? These mounts were intended for an AR15 platform gun (I believe), but I shouldn't run into any issues right?

 

[Outsydlooknin75]

Re: opinions on the JE enterprises scope mounts

why do people buy shit THEN ask for opinions? You really dont want opinions, you just want to make yourself feel better about your purchase. If you had that much doubt why purchase in the first place?

 

[mwilkins]

Re: opinions on the JE enterprises scope mounts

I have several in 30mm. Never had an issue with either of them. One is on a .223 and the other on a 6.5g.

 

[uracowman]

Re: opinions on the JE enterprises scope mounts

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsy</div><div class="ubbcode-body">why do people buy shit THEN ask for opinions? You really dont want opinions, you just want to make yourself feel better about your purchase. If you had that much doubt why purchase in the first place?
</div></div>

 

[D_Lamz]

Re: opinions on the JE enterprises scope mounts

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsy</div><div class="ubbcode-body">why do people buy shit THEN ask for opinions? You really dont want opinions, you just want to make yourself feel better about your purchase. If you had that much doubt why purchase in the first place?
</div></div>

I agree

 

[Pullum]

Re: opinions on the JE enterprises scope mounts

i have used a 1in for several years on a rock river 223 no issues or problems. its a nice piece.

 

[@lent]

Re: opinions on the JE enterprises scope mounts

The only problem I can see is that it might be too high for you on a boltgun. AR mounts are usually higher because the stock is a straight one, where a bolt gun stock is often a bit lower in relation to the bore. JP mounts are good mounts, no doubt, but they are for the AR platform, mostly. If they height doesn't turn out to be a problem, then you should be in good shape. Ignore the guys who think it's too much trouble to answer a fella's question but it's NOT too much trouble to post something stupid.