Hello.
I haven't loaded for my 300WM in a while. I usually start load development in the middle of Hodgdons recommended range. It appears that their data may have changed since I developed these loads and may now be near max pressure. Can someone run them for me??
Rem 700 300WM, standard chamber, Hart 10 twist, 25".
1st load: 220 gr Scenar, Winchester brass, Fed 210 LR primer, 77.2 grains H1000, 3.485" OAL, NOT jammed.
2nd load: Barnes 175 LRX, Hornady/Frontier brass, CCI 200 LR primer, 74.0 gr H4831sc, 3.400" OAL, NOT jammed.
No signs of pressure on brass or bolt lift.
Thank you in advance.
Will
I haven't loaded for my 300WM in a while. I usually start load development in the middle of Hodgdons recommended range. It appears that their data may have changed since I developed these loads and may now be near max pressure. Can someone run them for me??
Rem 700 300WM, standard chamber, Hart 10 twist, 25".
1st load: 220 gr Scenar, Winchester brass, Fed 210 LR primer, 77.2 grains H1000, 3.485" OAL, NOT jammed.
2nd load: Barnes 175 LRX, Hornady/Frontier brass, CCI 200 LR primer, 74.0 gr H4831sc, 3.400" OAL, NOT jammed.
No signs of pressure on brass or bolt lift.
Thank you in advance.
Will
Last edited:
