Rifle Scopes Parker Hale C3A1 mount
- Thread starter ChrisF
- Start date
Re: Parker Hale C3A1 mount
Chris,
Thanks for the pics.
rgg_7
If you know anyone with a spare, I am interested. Was told of one for sale some time back at $850. I would be willing to do that for one or two or four.
Chris,
Thanks for the pics.
rgg_7
If you know anyone with a spare, I am interested. Was told of one for sale some time back at $850. I would be willing to do that for one or two or four.
Re: Parker Hale C3A1 mount
Again, the statement was "some time ago." What was the figure you saw?
Again, the statement was "some time ago." What was the figure you saw?
Re: Parker Hale C3A1 mount
I know someone that really needs one of these now......
BSully
John is over at my house right now.
I know someone that really needs one of these now......
John is over at my house right now.
Re: Parker Hale C3A1 mount
This past spring I was contacted by a fellow collector. The asking price was $1200.00. I was back to him in short order however it was sold. Could not get any info out of him. This is the cornerstone for building the C3A1 next to the correct barrel and sling. All other parts are available if you keeping asking. Ron
This past spring I was contacted by a fellow collector. The asking price was $1200.00. I was back to him in short order however it was sold. Could not get any info out of him. This is the cornerstone for building the C3A1 next to the correct barrel and sling. All other parts are available if you keeping asking. Ron
Re: Parker Hale C3A1 mount
Wow, almost half as much as a scope. A mount can be fabed up fairly easily, kinda hard to grind that glass and get that center chunk to say C3 Sniper however. I would think the C3 scope would be the cornerstone, without it you just have a M87 with an expensive mount and a scope that "looks" like the real thing. Then again when it is all together it is just a replica and doing the math with those numbers, 2k+ for a rifle, 3k+ for a scope, 700.00 for a stock, 300.00 for a barrel with the correct contour and (gulp) 1.2k for a mount youre sitting on a 8k+. The only two real parts would be the scope and base. Think Ill make my own.
Wow, almost half as much as a scope. A mount can be fabed up fairly easily, kinda hard to grind that glass and get that center chunk to say C3 Sniper however. I would think the C3 scope would be the cornerstone, without it you just have a M87 with an expensive mount and a scope that "looks" like the real thing. Then again when it is all together it is just a replica and doing the math with those numbers, 2k+ for a rifle, 3k+ for a scope, 700.00 for a stock, 300.00 for a barrel with the correct contour and (gulp) 1.2k for a mount youre sitting on a 8k+. The only two real parts would be the scope and base. Think Ill make my own.
Re: Parker Hale C3A1 mount
Here's a pic of a Parker Hale M87 rifle , this is as close as anyone is going to get to a C3A1 action .
If you look at the rear scope mount area , its a small dovetail block thats removable ( 2x screws ) , this little block is not used with the C3A1 , and is removed .
Here's a pic of a Parker Hale M87 rifle , this is as close as anyone is going to get to a C3A1 action .
If you look at the rear scope mount area , its a small dovetail block thats removable ( 2x screws ) , this little block is not used with the C3A1 , and is removed .
Re: Parker Hale C3A1 mount
Yes , its 30-06 in lenght , so its longer than say a FAL or M14 mag .
The size is usually 6rds , but they did also make a 10rd version later on .
Later Chris
Yes , its 30-06 in lenght , so its longer than say a FAL or M14 mag .
The size is usually 6rds , but they did also make a 10rd version later on .
Later Chris
