EeeeK! Your brooms, weeder, and rake are crooked!
dayum, someone gets a lot of chicks!I just lay a 6ft Johnson
@RNWRKNP
The question is ... did you buy the Bosch laser level just to level your scope reticles?
I have been using the laser level as well for a while.
I use it in a "reversed" fashion to mount everything inside the house
What model is that?
This is the exact one I have, but I paid for the 360 degree option when doing work around house
https://m.lowes.com/pd/Bosch-65-ft-Laser-Chalkline-Self-Leveling-Line-Generator-Laser-Level/50285089
But they make a hundred different models with varying features... And anything with the two axis should work fine and save a few bucks if only buying for this purpose
For example
https://m.lowes.com/pd/Bosch-50-ft-Laser-Chalkline-Self-Leveling-Line-Generator-Laser-Level/50273919
https://m.lowes.com/pd/Bosch-40-ft-Beam-Self-Leveling-Cross-line-Laser-Level/1000237835
I like a 3' carpenters level, use it to verify the Spuhr level, set a small level on top of 3' level ..... never ends.
Never found a Spuhr level to not agree with the carpenters level.
Damn, what a great idea. I’ve been hanging a plumb line in the garage for the last few years while all the while I had this in my workbench.
https://www.amazon.com/DEWALT-DW088K-Self-Leveling-Cross-Laser/dp/B009O94W3E
Brilliant, thanks.
I've had good luck with these levels if you want an accurate small level for reference
http://www.starrett.com/metrology/product-detail/135A
Just picked up the RRS Scope Leveler to try out, save some money using rings.
Not bursting my bubble, but two different problems...Hate to burst your bubble guys. But you've got to level off of your elevation housing. If you level off your reticle and it has some cant in it (manufacturers have a acceptable range for reticle straightness) you will be inducing error as you dial up for elevation as it dials in line with the housing, not the reticle itself. Checking the reticle is only a good method after youve leveled off of your housing to make sure your reticle isnt canted from the factory to a point outside what is acceptable.
Cool. I just lay a 6ft Johnson level against a tree and do it that way, but hell yeh if you got a transit!